HP XP P9500 Manual Page 272

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 65 Error codes (part code 7105) (continued)
Part
Error
Code
Number
7105
8991
7105
8992
7105
8993
7105
8994
7105
8995
7105
8996
7105
55645
7105
56301
7105
56302
7105
56303
7105
56524
7105
57101
7105
58000
7105
58001
7105
58002
7105
58003
7105
58004
272 Message (part code group 7nnn)
Error Message
The command has been rejected,
because the Compatible FlashCopy
relationship exists.
The command has been rejected,
because sufficient amount of shared
memory is not installed.
The command has been rejected,
because the shared memory is not set
for Compatible FlashCopy.
The command has been rejected,
because the disk subsystem is busy.
The command has been rejected,
because the Compatible FlashCopy
relationship exists.
The command has been rejected,
because the disk subsystem is busy.
Quick Restore cannot be executed
because the specified pair is composed
of the external volumes with different
cache mode settings.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
This function cannot be used by the
storage partition administrator.
An error occurred during SVP
processing.
The command has been rejected
because the cascade request for creating
cascade pairs composed of volumes
belonging to the same consistency group
was issued.
The Add Pair command for adding the
L2 pair has been rejected because the
L1 pair is in V-Split status.
The Quick Restore command has been
rejected because the specified pair is
composed of a normal volume and a
customized volume (CV).
The command has been rejected
because a Remote Copy pair exists in
the same storage system.
The command has been rejected
because the issued request is an
operation that cannot be performed with
a volume that can be used from either
the mainframe or open-system hosts.
Recommended Action
Withdraw the Compatible FlashCopy
relationship.
Install additional shared memory.
Set the shared memory extension setting
for Compatible FlashCopy.
Wait a while, and retry the operation.
Withdraw the Compatible FlashCopy
relationship.
Wait a while, and retry the operation.
Use the Reverse Resync option.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Select a different volume or release the
consistency group setting.
Wait until the L1 pair status changes to
Split, then retry the operation.
Quick restore operation cannot be
performed when the pair is composed
of a normal volume and a customized
volume (CV). Select a different pair.
To continue the operation, delete the
Remote Copy pair.
The requested operation cannot be
performed. Check the status of the
specified volume.
Severity
Level
W
E
E
W
W
W
W
E
E
E
E
E
W
W
W
W
W

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: