Part Code 03222 - HP XP P9500 Manual

Table 38 Error codes (part code 3205) (continued)
Part Error
Code Number
3205 78061
3205 78062

Part code 03222

Table 39 Error codes (part code 03222)
Part Error
Code Number
03222 105190
03222 105191
03222 105192
03222 105193
03222 105194
03222 105195
03222 105196
03222 105197
03222 105198
03222 105199
03222 105200
03222 105201
03222 105202
03222 105203
03222 10521 1
03222 105432
1 12 Message (part code group 3nnn)
Error Message
The specified emulation type is different
from that of the pool specified to
associate with.
The specified values of CU and pool ID
do not follow the rule to create a volume
of TSE attribute.
Error Message
There is no data.
The processing cannot continue due to
an internal logic contradiction.
The association information of the
specified LDEV does not exist in the
configuration.
The status of the specified LDEV is not
normal.
The input value is out of the setting
range.
Zero is set in the size.
The size is not specified.
Other than the numerical value is set in
the size.
The specified LDEV is not a THP V-VOL.
The specified LDEV is not in the state of
zero data discarding.
The specified LDEV is in the state of zero
data discarding.
The specified LDEV does not exist in the
configuration.
The status information of the specified
LDEV does not exist in the configuration.
The detailed information of the pool that
is associated with the specified LDEV
does not exist in the configuration.
The selected volume cannot be enhanced
any further.
The performance of host I/O might
temporarily decrease for the expanded
volume when the capacity of a virtual
volume is expanded in a host connection
Recommended Action
Change the emulation type to be set to
the volume.
Set the values of CU and pool ID to the
odd or the even number.
Recommended Action
If the same problem persists despite
retrying, please contact HP Technical
Support.
Execute refresh.
Execute refresh.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Execute refresh.
Execute refresh.
Execute refresh.
Please decrease the number of selections
of volumes of the object or add the
capacity of the pool.
Expand the capacity of a virtual volume
at the time when the expansion does not
affect operations.
Severity
Level
W
W
Severity
Level
E
E
E
W
W
W
W
W
W
W
W
E
E
E
E
W