HP XP P9500 Manual page 254

Table 62 Error codes (part code 7005) (continued)
Part Error
Code Number
7005 57101
7005 57102
7005 58000
7005 58001
7005 58002
7005 58003
7005 58004
7005 58259
7005 58260
7005 58261
7005 58262
254 Message (part code group 7nnn)
Error Message
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The command has been rejected
because the cascade request for creating
cascade pairs composed of volumes
belonging to the same consistency group
was issued.
The operation of the L2 pair failed
because the L1 pair was in COPY(SP)
status, PSUS(SP) status or COPY(RS-R)
status.
The Quick Restore command has been
rejected because the specified pair is
composed of a normal volume and a
customized volume (CV).
The command has been rejected
because a Remote Copy pair exists in
the same subsystem frame.
The command has been rejected
because the issued request is an
operation that cannot be performed with
a volume that can be used from either
the mainframe or open-system hosts.
The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Remote Copy pair.
The command has been rejected,
because the specified P-VOL is used as
P-VOL of Continuous Access Synchronous
pair or External Storage Access
Manager pair.
The command has been rejected,
because the specified P-VOL is used as
S-VOL of Continuous Access Synchronous
pair.
A pair cannot be created because
shared memory for differential tables is
insufficient.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Select a different volume or release the
consistency group setting.
Wait until the L1 pair status changes to
PSUS or PAIR, then retry the operation.
The quick restore operation cannot be
performed when the pair is composed
of a normal volume and a customized
volume (CV). Select a different pair.
To continue the operation, delete the
remote copy pair.
The requested operation cannot be
performed. Check the status of the
specified volume.
Delete the Remote Copy pair or execute
the operation by other pairs.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous pair or
External Storage Access Manager pair.
See the section about sharing Business
Copy volumes in the HP P9000 Business
Copy User Guide for the relationship
between the state of the Continuous
Access Synchronous pair or External
Storage Access Manager pair and the
Business Copy operations.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section "Sharing Business Copy
volumes" in the HP P9000 Business Copy
User Guide for the relationship between
the state of the Continuous Access
Synchronous pair and the Business Copy
operations.
Add sufficient shared memory to create
a pair.
Severity
Level
E
E
W
W
W
W
W
W
W
W
I