Message (Part Code Group 6Nnn); Part Code 6005 - HP XP P9500 Manual

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

8 Message (part code group 6nnn)

This chapter includes the error messages with the part code 6005 to 6810.

Part code 6005

Table 53 Error codes (part code 6005)
Part
Error
Code
Number
6005
5013
6005
5099
6005
5145
6005
6000
6005
6012
6005
6023
6005
8000
6005
8001
6005
8100
6005
8104
Error Message
An error occurred during SVP
processing.
An error occurred during SVP
processing.
This function does not support the
specified port.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The SVP is busy. Please wait for a
while, and then retry the operation.
Time out error.
Time out error.
Time out error.
The storage system has accepted the
request normally, however the
processing requires some time. Wait
for a while, then refresh the window
and confirm the pair status has been
changed properly.
If the pair status is not changed despite
refreshing the window, check the MCU
or RCU configuration and the condition the condition of the paths
of the paths between the MCU and
RCU.
Recommended Action
If this problem persists,
please contact HP Technical
Support.
If this problem persists,
please contact HP Technical
Support.
Refresh the window, then
retry the operation.
If the same problem persists
despite retrying, please
contact HP Technical
Support.
If this problem persists,
please contact HP Technical
Support.
If this problem persists,
please contact HP Technical
Support.
If the same problem persists
despite retrying, please
contact HP Technical
Support.
If the problem persists
despite retrying, please
contact HP Technical
Support.
If the problem persists
despite retrying, please
contact HP Technical
Support.
If the problem persists
despite retrying, please
contact HP Technical
Support.
Wait for a while, and then
refresh the window and
confirm the pair status has
been changed properly.
If the pair status is not
changed despite refreshing
the window, check the MCU
or RCU configuration and
between the MCU and RCU.
Severity Level
E
E
W
E
E
W
W
W
W
W
Part code 6005
151

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents