HP XP P9500 Manual page 229

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 58 Error codes (part code 6510) (continued)
Part
Error
Error Message
Code
Number
6510
55039
You are specifying "Mirror" for the range
and trying to manipulate the same
mirror. Select only one data volume pair
in the mirror when you specify "Mirror"
for the range.
6510
55202
The specified controller ID cannot be
used.
6510
55207
Some of the specified values are
incorrect. Two times the value of "M-JNL
Cache" plus the value of "R-JNL Cache"
must be equal to or less than 100. Or,
the value of "Threshold of start Async
JNL" must be equal to or less than the
value of "Threshold of start Sync JNL."
6510
55208
The specified journal number is incorrect.
Specify the correct journal number.
6510
55229
There are some pairs where "Mirror" is
not specified as the range in the pairs
specified to be deleted forcibly.
Specify "Mirror" as the range when you
want to delete pairs forcibly.
6510
55644
[Warning]
There are some pairs where "Group" is
not specified as the range in the pairs
specified to be deleted forcibly.
Other pairs in the same group may
suspend due to a failure by this
operation.
Are you sure you want to delete pairs?
6510
56504
There is no journal registered that can
be used as a master journal.
6510
56505
There are no secondary subsystems
available. Please register secondary
subsystems and then retry the operation.
6510
56522
There are no consistency groups
available. Please create unused
consistency groups and then retry the
operation.
6510
56523
No more mirrors can be created for the
specified volume.
6510
59004
An error occurred. Please check the error
details.
6510
59005
There are some invalid input values.
6510
59006
No more journal volumes can be
registered, or too many volumes are
selected.
6510
59007
Are you sure you want to delete the
specified subsystems?
Recommended Action
Check the range setting. If you specify
"Mirror," select only one data volume
pair in the mirror.
Check the specified controller ID.
The value of "Threshold of start Async
JNL" must equal or be less than the
"Threshold of start Sync JNL" value.
Specify the correct journal number.
Specify normal deletion, or specify
"Mirror" as the range.
To delete pairs, click [Yes]. Otherwise,
click [No].
Register a journal that has the same CLPR
number as the specified volume, then
retry the operation.
Register secondary storage systems, then
retry the operation.
There are no consistency groups
available. Create unused consistency
groups, then retry the operation.
Check the mirrors of the specified
volume.
Check the error information.
Specify the valid value.
Check the number of journal volumes in
the specified journal group, or check the
number of the selected volumes.
To delete the specified storage system,
click [OK]. Otherwise, click [Cancel].
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 6510 229

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents