Table 47 Error codes (part code 05122) (continued)
Part
Error
Code
Number
05122
107004
05122
107005
05122
107015
Part code 5205
Table 48 Error codes (part code 5205)
Part
Error
Code
Number
5205
1076
5205
1077
5205
1078
5205
1079
5205
1080
5205
1081
5205
1082
5205
1083
5205
1084
128 Message (part code group 5nnn)
Error Message
The processing cannot continue due to
an internal logic contradiction.
The processing cannot continue due to
an internal logic contradiction.
The processing cannot continue due to
an internal logic contradiction.
Error Message
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The volume is a LUSE volume. Cannot
change to reserve volume.
The volume specified as the reserved
volume has the Cache Residency setting.
The command was rejected due to one
of the following reasons.
The specified volume was blocked.
The specified volume was used as a
system disk.
The specified volume(s) are used as a
command device.
The reserved volume(s) is not equipped.
The specified volume is already reserved.
The configuration information on such
as a volume (LDEV) displayed on the
window might be out of date.
The number of reserved volume that can
be set in the storage system exceeds the
maximum. The configuration information
on such as a volume (LDEV) displayed
on the window might be out of date.
Recommended Action
Retry the operation. If the same problem
occurs again, close the windows, refresh
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
Retry the operation. If the same problem
occurs again, close the windows, refresh
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Recommended Action
Specify another volume.
The volume used by Business Copy Z, or
Business Copy cannot be used. Specify
another volume.
Check the setting.
Release the Cache Residency setting.
Recover the blocked volume, then retry
the operation. Also, the system disk
cannot be used as P-VOL. Specify
another volume.
Release the command device, or select
another volume.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Click [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
Click [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
Severity
Level
E
E
E
Severity
Level
W
W
W
W
W
W
W
W
W