HP XP P9500 Manual Page 69

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 27 Error codes (part code 1005) (continued)
Part
Error
Error Message
Code
Number
1005
55561
An error occurred during SVP
processing.
1005
55566
An error occurred during SVP
processing.
1005
55569
The specified Group-ID is already
registered.
1005
55571
The target cannot be set because the
number of targets exceeds the maximum
that can be set in a port.
1005
55574
The setting of the specified port cannot
be changed because the attribute of the
specified port is Initiator or External.
1005
56301
An error occurred during SVP
processing.
1005
56302
An error occurred during SVP
processing.
1005
56303
An error occurred during SVP
processing.
1005
57101
An error occurred during SVP
processing.
1005
57102
An error occurred during SVP
processing.
1005
58572
An error occurred while connecting to
the storage system.
1005
58573
This function is not supported.
1005
58574
An error occurred while connecting to
the storage system.
1005
58575
An error occurred while connecting to
the storage system.
1005
58576
A communication time-out error occurred
in the storage system.
1005
65660
The Thin Provisioning volume is not
associated with a pool.
1005
75009
The selected WWN has been registered
in a host group.
1005
76510
The specified port cannot be used
because the user has no access right to
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check the setting.
Check the setting.
Check the setting.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Wait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check if the DKCMAIN and SVP
microcode versions are mismatched.
Wait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Wait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Wait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Associate the Thin Provisioning volume
with a pool, then retry the operation.
Check the settings, then retry the
operation.
Verify the resources allocation for the
user with security administrator role.
Severity
Level
E
E
W
W
W
E
E
E
E
E
W
E
W
W
W
W
W
W
Part code 1005
69

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: