HP XP P9500 Manual page 103

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 35 Error codes (part code 03022) (continued)
Part
Error
Error Message
Code
Number
03022
105271
The number of free spaces that exist in
the selected parity group exceeds the
number of volumes that can be set.
03022
105272
Data Output cannot be set more than 3.
03022
105273
The interruption process cannot be done
because there is an unexecuted specified
task.
03022
105274
The interruption processing was
completed.
03022
105275
The current setting exceeds the maximum
number of quick formatting that can be
executed.
03022
105279
This functionality is not available. Virtual
LVI is required.
03022
105280
This functionality is not available. Open
Volume Management is required.
03022
105281
There is no LDEV that can be formatted.
03022
105299
The specified LDEV cannot be used
because the user has no access right to
a resource group to which the LDEV
belongs.
03022
105300
The specified parity group cannot be
used because the user has no access
right to a resource group to which the
parity group belongs.
03022
105301
The operation cannot be done because
the parity group which belongs to a
resource group to which the user has no
access right includes the specified LDEV.
03022
105302
The operation cannot be done because
the specified parity group contains the
LDEV that belongs to a resource group
to which the user has no access right.
03022
105308
The operation cannot be done because
the specified THP V-VOL is included in
the pool that belongs to a resource group
to which the user has no access right.
03022
105309
The specified pool cannot be used
because the user has no access right to
a resource group to which the pool
belongs.
03022
105312
Various system types are mixed in the
selected pools.
03022
105313
An LDEV cannot be created because the
free space that is available to set has
already been registered in the task.
03022
105314
In the selected parity group, there is an
area where LDEV cannot be made by
default.
Recommended Action
Select the free spaces again from the
Select Free Space window.
Check the setting(s).
Wait for a while, then retry the
operation.
The task status is changed. Close the
window, then check the task status.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Check the setting(s).
Wait until the task is complete, and then
retry the operation.
Select the emulation type or the free
space again, and then create an LDEV.
Severity
Level
W
W
i
i
i
W
W
E
W
W
W
W
W
W
W
W
W
Part code 03022 103

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents