HP XP P9500 Manual page 153

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 53 Error codes (part code 6005) (continued)
Part
Error
Error Message
Code
Number
6005
8713
The port group already exists on the
specified port.
6005
8714
An internal error occurred.
6005
8715
Invalid number of paths.
6005
8717
Invalid Destination Link Address.
6005
8718
The specified logical path already
exists.
6005
8719
Invalid RCU serial number, SSID, Link
Address or Controller ID.
6005
8720
Too many RCUs. (Four RCUs are the
maximum.)
6005
8721
Path not completely established.
6005
8722
Failure during path creation.
6005
8723
The Edit Path operation was rejected
because the specified path is the last
path of some Remote Copy pairs.
Recommended Action
been recovered. Two ways
to recover paths are:
(a) Execute ESTPATH from
the host console, or
(b) First delete the path(s)
from the SVP, then re-add
them.
The port type could not be
changed because the port
group was set in the
specified package. Delete
the group setting, then
change the port type.
Please contact HP Technical
Support.
The specified number of
paths is not within the
acceptable path range of 0
to 4. Verify the number of
paths and retry the
operation.
The specified logical
address must be either 00
or 01. Check the logical
address and retry the
operation.
Check all existing logical
path addresses, and specify
another link address or port.
Check the serial number,
SSID, link address and
controller ID of the RCU, and
set the correct value. Then
retry the operation. If the
same error occurs, please
contact HP Technical
Support.
A maximum of four RCUs
are permitted, and that
many already exist.
Check the path connections
between the MCU and the
RCU, then retry the
operation.
Check the path connections
between the MCU and the
RCU, then retry the
operation.
Add another path, or delete
all pairs on the RCU. Then
retry the operation.
Severity Level
W
E
W
W
W
W
W
W
W
W
Part code 6005 153

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents