Part Code 1310 - HP XP P9500 Manual

Table 29 Error codes (part code 1305) (continued)
Part Error
Code Number
1305 66572
1305 66573
1305 66574
1305 66575
1305 66576
1305 66577
1305 66578
1305 66675

Part code 1310

Table 30 Error codes (part code 1310)
Part Error
Code Number
1310 5832
1310 5833
1310 5834
1310 5836
1310 9366
1310 55601
1310 55602
1310 55603
1310 69046
1310 69047
78 Message (part code group 1nnn)
Error Message
Declaration is invalid.
The number of lines or the number of
characters in one line exceeds the
maximum number.
There is a line that cannot be interpreted
as an element of the spreadsheet.
It is not corresponding to the serial
number of the device that executes the
spreadsheet.
Any operation tag to the program
product is not set.
Version number or program product of
the declaration is not correct.
There was an error while executing the
spreadsheet. Please confirm the result of
each parameter.
The syntax of parameter is invalid.
Error Message
The user name is incorrect.
The secret is incorrect.
The reentered secret does not match the
previously entered secret.
The user name or the secret has not been
changed.
If a host is connected, the connection will
be disconnected. Do you want to
continue?
The specified time out period is invalid.
The specified authentication interval is
invalid.
The specified number of times of
authentication is invalid.
The argument is insufficient.
The specified command is not supported.
Recommended Action
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Check the contents of the spreadsheet.
Recommended Action
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
To continue processing, click [OK]. To
stop processing, click [Cancel].
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
See the User Guide and check the
argument for the program to be
executed.
Check the User Guide.
Severity
Level
W
W
W
W
W
W
W
W
Severity
Level
W
W
W
W
W
W
W
W
W
W