HP XP P9500 Manual page 250

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 62 Error codes (part code 7005) (continued)
Part
Error
Code
Number
7005
8606
7005
8607
7005
8608
7005
8609
7005
8610
7005
861 1
7005
8612
7005
8613
7005
8614
7005
8615
7005
8618
7005
8619
7005
8622
250 Message (part code group 7nnn)
Error Message
The operation to create L2 pair has been
rejected, because the P-VOL of L1 pair
is used as the P-VOL of Continuous
Access Synchronous pair or External
Storage Access Manager pair.
The command has been rejected,
because the specified S-VOL is used as
P-VOL of Continuous Access Synchronous
pair or External Storage Access
Manager pair.
The specified S-VOL is not defined.
The specified volume is not set as a
reserved volume.
The S-VOL is a target volume for Auto
LUN.
The specified volume is an S-VOL.
The specified volume is not an S-VOL.
The RAID level of the specified S-VOL is
not supported.
The command has been rejected,
because the specified S-VOL is used as
P-VOL of Continuous Access Synchronous
or External Storage Access Manager
pair.
The command has been rejected,
because the specified S-VOL is used as
S-VOL of Continuous Access Synchronous
or External Storage Access Manager
pair.
The S-VOL is already defined as a P-VOL.
The specified S-VOL is defined as a
source volume for Auto LUN.
The command has been rejected,
because the specified volume is used as
P-VOL of Continuous Access Synchronous
or External Storage Access Manager
pair.
Recommended Action
When the P-VOL of L1 pair is used as
the P-VOL of Continuous Access
Synchronous pair or External Storage
Access Manager pair, L2 pair cannot be
created.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous pair or
External Storage Access Manager pair.
See the section about sharing Business
Copy volumes in the HP P9000 Business
Copy User Guide for the relationship
between the state of the Continuous
Access Synchronous pair or External
Storage Access Manager pair and the
Business Copy operations.
Refresh the window, and retry the
operation.
Check the contents, and retry.
Release the Auto LUN setting.
Check the volume status.
Check the volume status.
Specify the volume number of the
supported RAID level.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous or
External Storage Access Manager pair.
See the section about sharing Business
Copy volumes in the HP P9000 Business
Copy User Guide for the relationship
between the state of the Continuous
Access Synchronous or External Storage
Access Manager pair and the Business
Copy operations.
The S-VOL of Continuous Access
Synchronous or External Storage Access
Manager pair cannot be used as S-VOL
of Business Copy.
Specify another volume.
Check the volume number.
Release the Auto LUN setting.
The P-VOL of Continuous Access
Synchronous or External Storage Access
Manager pair cannot be used as a
reserved volume.
Specify another volume.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents