HP XP P9500 Manual page 76

Table 28 Error codes (part code 01022) (continued)
Part Error
Code Number
01022 107001
01022 107002
01022 107003
01022 107004
01022 107005
01022 107006
01022 108003
01022 108004
01022 108005
01022 108006
01022 108007
01022 108008
01022 108009
01022 108010
01022 10801 1
76 Message (part code group 1nnn)
Error Message
The processing cannot continue due to
an internal logic contradiction.
The process cannot continue due to
internal logic contradiction.
The process cannot continue due to
internal logic contradiction.
The process cannot continue due to
internal logic contradiction.
The process cannot continue due to
internal logic contradiction.
The type of the specified port is not fibre
port.
The volume, which is allocated as LDEV
in the target path information, is set as
reserved by Data Retention.
The volume, which is allocated as LDEV
in the path information that is set under
the target host group, is set as reserved
by Data Retention.
There is a volume, which is set as
reserved by Data Retention, in the target
path information.
The specified LDEV is a reserved volume
of Data Retention.
The specified LDEV is set other than the
Read/Write (S-VOL enabled) of Data
Retention.
The specified LDEV is a emulation type
other than the OPEN system.
The specified LDEV is a reserved volume
of Auto LUN.
The specified LDEV is a system disk.
The specified LDEV is a journal volume
of Continuous Access Journal.
Recommended Action
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Retry the operation. If the same problem
occurs again, close the windows, refresh
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
Retry the operation. If the same problem
occurs again, close the windows, refresh
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Severity
Level
E
E
E
E
E
W
W
W
W
W
W
W
W
W
W