Ultrium Bar Code Labels - HP StorageWorks ESL E-Series User Manual

Library Operations
Note:
during inventory or when you power on the library. When this happens, Going on
line displays in the OCP.

Ultrium bar code labels

Ultrium cartridges have a recessed area located on the face of the cartridge next to
the write-protect switch. Use this area for attaching the adhesive-backed bar code
label (see
designated area.
Figure 17: Attaching an Ultrium bar code label
54
If you have more than 100 unlabeled tape cartridges, your library will hang
Figure 17). Do not apply labels onto the cartridge except in this
Caution: The bar code label should be applied as shown in
page 58, with the alphanumeric portion facing the hub side of the cartridge.
Never apply multiple labels onto a cartridge, because extra labels can cause
the cartridge to jam inside a tape drive.
Figure
ESL E-Series Tape Library User's Guide
20,