HP XP P9500 Manual page 43

Table 19 Error codes (part code 0405) (continued)
Part Error Error Message
Code Number
Cont Access Journal 3DC & 4x4
Open MF >>>>> Continuous Access
Journal Z
Cont Access Journal 3DC & 4x4
Open MF >>>>> Continuous Access
Journal
Hyper Parallel Access Volumes
>>>>> Parallel Access Volumes
Smart Tiers Thin Provisioning
Thin Provisioning Z >>>>> Thin
Provisioning
0405 5078 To remove this program product, you
must remove another program product
first.
Program Product Name >>>>>
Preamble
-------------------------------
Continuous Access Journal Z >>>>>
Continuous Access Synchronous Z
Continuous Access Journal >>>>>
Continuous Access Synchronous
External Storage Access Manager
>>>>> Continuous Access
Synchronous
Auto LUN >>>>> Performance
Monitor
Cont Access Journal 3DC & 4x4
Open MF >>>>> Continuous Access
Journal Z
Cont Access Journal 3DC & 4x4
Open MF >>>>> Continuous Access
Journal
Hyper Parallel Access Volumes
>>>>> Parallel Access Volumes
Smart Tiers >>>>> Thin Provisioning
Thin Provisioning Z >>>>> Thin
Provisioning
0405 5079 This program product needs another
DKC type.
0405 5080 You cannot change this program
product.
0405 5501 The trial days have exceeded the
specified extended days.
0405 5502 The program product will be removed
because the licensed capacity is
insufficient.
0405 5524 The specified license key cannot be
installed, because the environment
required for the program product (license
key) is not prepared.
Recommended Action
To remove this program product, you
must remove another program product
first.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please confirm the installation status of
the program product.
Please increase the licensed capacity
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
E
Part code 0405 43