HP XP P9500 Manual page 160

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 53 Error codes (part code 6005) (continued)
Part
Error
Code
Number
6005
8796
6005
8797
6005
8798
6005
8799
6005
8800
6005
8801
6005
8808
6005
8809
160 Message (part code group 6nnn)
Error Message
A reserved volume of Business Copy
Z or Business Copy.
A volume used in Business Copy Z
or Business Copy in Reverse Copy
status.
A T-VOL of Compatible FlashCopy.
A FICON(R) Data Migration Source
Volume.
The operation failed because the
specified R-VOL applied to any of the
following:
A T-VOL of Business Copy Z or
Compatible FlashCopy.
An S-VOL of Business Copy.
A reserved volume of Business Copy
Z or Business Copy.
A volume of Business Copy Z or
Business Copy in Reverse Copy
status.
A volume of FICON(R) Data
Migration.
If the M-VOL is a Business Copy
Z/Compatible FlashCopy T-VOL, one
S-VOL must be paired with one T-VOL.
If the M-VOL is a Business Copy S-VOL,
one P-VOL must be paired with one
S-VOL.
The MCU is already used for Business
Copy Z/Business Copy/Compatible
FlashCopy.
The M-VOL is already in use for Auto
LUN.
The R-VOL is already in use for Auto
LUN.
The R-VOL is reserved, or the RCU or
the path between MCU-RCU is in a
heavy load condition.
Please retry Add
Pair(Paircreate)/Resume Pair(Pairresync)
operation in a few minutes.
Please wait. Retry Add
Pair(Paircreate)/Resume Pair(Pairresync)
operation in a few minutes.
Recommended Action
Check the status of the
specified R-VOL from the
host or the SVP.
Check the status of the
specified M-VOL from the
host or the SVP.
Confirm the status of
Business Copy Z/Business
Copy/Compatible
FlashCopy in MCU from the
host or the SVP.
Verify the status of the
specified M-VOL.
Verify the status of the
specified R-VOL.
Verify the status of the
specified R-VOL. If the
device is not reserved, retry
the operation.
The add/resume pair
operation failed, because
the either the specified
volume or another volume in
the same group is being
changed to simplex or
suspend status. Retry the
operation after the status
change is completed.
Add/resume pair operation
failed. The specified volume
or another volume in the
Severity Level
W
W
W
W
W
W
W
W

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents