Part Code 0405 - HP XP P9500 Manual

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 18 Error codes (part code 0310) (continued)
Part
Error
Code
Number
0310
5040
0310
5041
0310
5050
0310
5051
0310
9060
0310
65684
0310
65685
0310
65686
0310
65687
0310
65710
0310
69059
0310
69060

Part code 0405

Table 19 Error codes (part code 0405)
Part
Error
Code
Number
0405
5013
0405
5047
0405
5070
0405
5071
0405
5072
Error Message
The maximum number of IP Address is
32.
The maximum number of Community
name is 32.
This Community name is already in use.
This IP address is already in use.
This item will be deleted. Do you want
to continue?
Specify a value between 0 to FFFF in
each field.
0 cannot be specified in all the fields.
The OS being used does not support
Ipv6.
Specify a value between 0 to 256 in
each field for IPv4.
Specify a value between 0 to FFFF in
each field for IPv6.
The information being set has not been
applied to the device yet. Apply the
information to the device, then retry the
operation.
Test Trap will be sent to the registered
community. Do you want to continue the
operation?
Trap transmission completed. Please wait
for a while and check the reception of
the Trap.
Error Message
An error occurred during SVP
processing.
An error occurred when installing or
removing the program product. Please
select the program product and select
[Detail] to check the details of the error.
The product name is different. Select the
correct program product name.
Unable to install the license key.
Temporary key installed.
The existing capacity of the licensed
program product is invalid.
Recommended Action
Reduce the number, and retry.
Reduce the number, and retry.
Check the content of the operation.
Check the content of the operation.
-
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
Click [Apply] and apply the setting
information, or [Cancel] and discard the
setting information, and retry the
operation.
Click [OK] to continue the operation.
Confirm that the Trap has been received.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Check the product name of the selected
program product.
Purchase the official license to use this
software.
Order the appropriate license that meets
the requirement.
Severity
Level
W
W
W
W
W
W
W
W
W
i
W
i
Severity
Level
E
W
W
W
W
Part code 0405
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents