HP XP P9500 Manual page 129

Table 48 Error codes (part code 5205) (continued)
Part Error Error Message
Code Number
5205 1085 The volume(s) are already used by Auto
LUN.
5205 1086 The RAID level of the target volume is not
supported.
5205 1087 The volume specified as a migration
target is being formatted.
5205 1088 The volume specified as a migration
source cannot be migrated, because it
is already used as a reserved volume of
Business Copy Z, Business Copy, or Auto
LUN.
5205 1094 The specified volume is not a reserved
volume. The configuration information
on such as a volume (LDEV) displayed
on the window might be out of date.
5205 1095 The number of the reserved volumes
exceeds the maximum number that can
be assigned.
5205 1096 The command has been rejected,
because the volume specified as a target
volume or a reserved volume is used by
the host.
5205 1 109 Auto LUN does not support the volume(s).
5205 1 1 17 The volume specified as a migration
source is already used as a volume of
Concurrent Copy.
5205 1 1 18 The volume specified as a migration
target is already used as a volume of
Concurrent Copy.
5205 1 1 19 The volume(s) is already being used by
Concurrent Copy.
5205 1 120 The volume specified as a migration
source is already used as a volume of
Compatible XRC.
5205 1 121 The volume specified as a migration
target is already used as a volume of
Compatible XRC.
5205 1 122 The volume(s) is already being used by
Compatible XRC.
5205 1207 The volume types do not match.
5205 1208 Auto LUN does not support the volume(s).
Recommended Action
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Check the microcode version, and please
contact HP Technical Support.
Retry the operation after the format is
completed.
Specify another volume.
Click [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Execute the vary offline command to
disable the volume from the mainframe
host, then retry the operation.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 5205 129