Download Print this page

HP XP P9500 Manual Page 150

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 52 Error codes (part code 5310) (continued)
Part
Error
Code
Number
5310
9079
5310
9312
5310
9313
5310
9314
5310
9315
5310
9326
5310
9328
5310
9329
5310
9330
5310
9331
5310
9333
5310
9334
5310
9335
5310
59000
5310
65733
150 Message (part code group 5nnn)
Error Message
The Performance Control group is
deleted because no WWN is registered
in the Performance Control group.
The control status will change to "Port
Control."
The control status will change to
"WWN Control."
The control status will change to "No
Control" because the upper value is 0
for all ports.
The monitoring switch is turned OFF.
The control status will change to "No
Control."
The settings for the removed ports
remain.
Next, the initialization for the settings
on port control will be executed.
Next, the initialization for the settings
on WWN control will be executed.
The specified WWN is already in use.
Do you want to change the control
status to Port Control?
Do you want to change the control
status to WWN Control?
Do you want to change the control
status to No Control?
The Performance Control group extends
across multiple SLPRs. Do you want to
continue?
WWN cannot be registered because
the number of WWNs of one of the
ports to be monitored at the same time
exceeds the maximum.
Recommended Action
To continue processing, click [OK]. To
stop processing, click [Cancel].
Click [OK].
Click [OK].
Set up a maximum value to enable the
control.
If you use the real time option for the
first time, turn the monitoring switch
ON.
If you accept the change in the control
status to "No Control", continue the
operation.
To clear the settings, check the check
box of "Delete ports if CHA is
removed," and then click [Apply].
If you click [OK] on the next window,
the settings on port control will be
initialized. To quit the operation, click
[Cancel] on the next window.
If you click [OK] on the next window,
the settings on WWN control will be
initialized. To quit the operation, click
[Cancel] on the next window.
Correct the specified contents, and
request the setting of the configuration
information again.
Click [Yes] to change the control status.
Click [Yes] to change the control status.
Click [Yes] to change the control status.
To continue processing, click [OK]. To
stop processing, click [Cancel].
Reduce the number of WWNs to be
monitored, which exceeds the
maximum, and then retry the operation.
Severity
Level
i
W
W
W
i
W
N
W
W
W
i
i
i
i
i

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: