HP XP P9500 Manual page 185

Table 55 Error codes (part code 6010) (continued)
Part Error Error Message
Code Number
6010 5901 1 Are you sure you want to output the %s
file?
6010 59012 The %s file does not exist.
6010 59013 The specified file already exists. Do you
want to overwrite this file?
6010 59026 The specified RCU has been already set.
Check the RCU parameter settings.
6010 59030 The monitoring data saved at present
will be deleted.
6010 59031 The monitoring data being saved at
present is deleted when the monitoring
switch is set to Enable at the next time.
6010 59340 [Warning]
This operation deletes all command
devices for the Business Continuity
Manager. Are you sure you want to
continue this operation?
6010 65663 The specified LDKC number is incorrect.
Specify the correct LDKC number.
6010 65664 The specified volume is not valid for this
program product. Specify another
volume.
6010 65665 The specified volume is not the volume
to be monitored. Check the monitoring
setting.
6010 65769 There are no quorum disk IDs available.
Register some quorum disk IDs, then retry
the operation.
6010 65770 There are no RCUs available. Register
some RCUs of CU Free, then retry the
operation.
6010 65771 There are no external volumes that can
be used as a quorum disk. Create some
external volumes, then retry the
operation.
6010 65772 An external volume is assigned to two
or more quorum disk IDs. An external
volume cannot be used for multiple
quorum disk IDs.
Recommended Action
To output the file, click [Yes]. Otherwise,
click [No].
Click [OK].
To overwrite the file, click [Yes].
Otherwise, click [No].
Check the RCU parameter settings.
To continue the operation, click [OK]. To
cancel the operation, click [Cancel].
The monitoring data currently saved will
be deleted if you change the setting of
the monitoring switch. If necessary, use
the Performance Monitor Export Tool to
export the monitoring data file.
To continue processing, click [OK]. To
stop processing, click [Cancel].
If the currently saved monitoring data is
needed, use the Export Tool to save the
data.
To continue the operation, click [OK].
Otherwise, click [Cancel].
Specify the correct LDKC number.
Specify another volume.
Check the monitoring setting.
Register some quorum disk IDs, then retry
the operation.
Register some RCUs of CU Free, then
retry the operation.
Create some external volumes, then retry
the operation.
Assign another external volume not used
in the quorum disk IDs, then retry the
operation.
Severity
Level
i
i
W
W
W
W
W
W
W
W
W
W
W
W
Part code 6010 185