HP XP P9500 Manual page 31

Table 15 Error codes (part code 00222) (continued)
Part Error Error Message
Code Number
00222 105393 Other than the numeric characters are
input to the specified timeout value of
external user group mapping.
00222 105394 The value that can be set for the timeout
of external user group mapping is 1 to
120.
00222 105395 The retry interval for the external user
group mapping is not input.
00222 105396 Other than the numeric characters are
input to the retry interval of external user
group mapping.
00222 105397 The value that can be input to the retry
interval of external user group mapping
is 1 to 60.
00222 105398 The number of retries for the external
user group mapping is not input.
00222 105399 Other than the numeric characters are
input to the specified number of retries
of authentication server.
00222 105400 The value that can be input to the
number of retries of external user group
mapping is 1 to 50.
00222 105401 A secondary server cannot be enabled
because DNS Lookup of external user
group mapping is enabled.
00222 105402 LDAP over SSL/TLS for protocol cannot
be selected because DNS Lookup of
external user group mapping is enabled.
00222 105403 The primary host name of external user
group mapping is not input.
00222 105404 The primary host name of external user
group mapping is too long.
00222 105405 Invalid characters are used in the
specified primary host name of external
user group mapping.
00222 105406 The primary port number of external user
group mapping is not input.
00222 105407 Other than the numeric characters are
input to the specified primary port
number of external user group mapping.
00222 105408 The value that can be input to the
primary port number of external user
group mapping is 1 to 65535.
00222 105409 The secondary host name of external
user group mapping is not input.
00222 105410 The secondary host name of external
user group mapping is too long.
Recommended Action
Enter with numeric characters.
Set a value within the range.
This is a compulsory input item.
Enter with numeric characters.
Set a value within the range.
This is a compulsory input item.
Enter with numeric characters.
Set a value within the range.
If you want to enable the secondary
server, disable the setting of DNS
Lookup.
If you want to select LDAP over SSL/TLS
for protocol, disable the setting of DNS
Lookup.
This is a compulsory input item.
Enter with 1 to 255 characters.
Enter with alphanumeric characters and
symbols( - . ).
This is a compulsory input item.
Enter with numeric characters.
Set a value within the range.
This is a compulsory input item.
Enter with 1 to 255 characters.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 00222 31