HP XP P9500 Manual page 79

Table 30 Error codes (part code 1310) (continued)
Part Error Error Message
Code Number
1310 69048 Insufficient permission to operate this.
1310 69049 Insufficient permission to operate this.
1310 69050 An error occurred during SVP
processing.
1310 69051 Authentication information is invalid.
1310 69052 An error occurred in the client
processing.
1310 69053 This functionality is not available.
1310 69054 Insufficient permission to operate this.
1310 69055 You cannot use multi-byte characters.
1310 69066 It is not a CFL_CLI tool enabled SVP
microcode.
Recommended Action
The following role is required for this
operation.
Storage Administrator (Initial
Configuration)
Contact the security manager, and
register the user to User Group who has
a necessary role.
The following role is required for this
operation.
Storage Administrator (Initial
Configuration)
Contact the security manager, and
register the user to User Group who has
a necessary role.
If this problem persists, please contact
HP Technical Support.
Re-create the authentication information
by the authentication information
creation tool.
Refer to the message displayed in the
console for details.
See also the troubleshooting section of
the HP Remote Web Console User Guide
to solve this problem.
Remote Web Console program product
is required.
All of the following roles are required for
this operation.
Storage Administrator (Initial
Configuration)
Storage Administrator (System
Resource Management)
Storage Administrator (Provisioning)
Storage Administrator (Performance
Management)
Storage Administrator (Local Copy)
Storage Administrator (Remote Copy)
Contact the security manager, and
register the user to User Group who has
a necessary role.
Remove the multi-byte characters and
retry.
Check whether the CFL_CLI tool is
enabled in the SVP microcode.
Severity
Level
W
W
E
W
W
W
W
W
W
Part code 1310 79