HP XP P9500 Manual page 176

Table 53 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 68827
6005 68829
6005 68830
6005 68831
6005 68844
6005 68845
6005 68846
6005 68847
176 Message (part code group 6nnn)
Error Message
The operation failed, because there was
an error in the specified parameter.
The specified volume has already been
set to the quorum disk.
The specified volume is not a quorum
disk.
The operation failed, because the
specified quorum disk was used for
External Storage Access Manager.
The operation failed, because the
specified M-VOL was a volume of Thin
Provisioning or Thin Provisioning Z
volume whose zero data was being
discarded.
The operation failed, because the
specified R-VOL was a volume of Thin
Provisioning or Thin Provisioning Z
volume whose zero data was being
discarded.
The operation failed, because the pool
associated with the Thin Provisioning
volume or Thin Provisioning Z volume
that is specified as the M-VOL was
being initialized.
The operation failed, because the pool
associated with the Thin Provisioning
volume or Thin Provisioning Z volume
Recommended Action
The serial number of the
local DKC cannot be set
as the serial number of
the other DKC. Check the
input serial number of the
other DKC.
A quorum disk cannot be
registered in a same
external storage device
with a different quorum
disk ID. Check whether a
quorum disk is registered
in the selected external
storage device with a
different quorum disk ID.
The serial number of the
other DKC, which is set
from MCU (or RCU)
when registering a
quorum disk, might be
different from the serial
number of the RCU (or
MCU). Check the input
serial number of the other
DKC, which is set from
MCU (or RCU) when
registering a quorum
disk.
Check the volume setting.
Check the volume setting.
Release all the pairs of
External Storage Access
Manager of the specified
quorum disk ID, then retry
the operation.
Retry the operation after the
completion of discarding
zero data on the specified
volume.
Retry the operation after the
completion of discarding
zero data on the specified
volume.
Wait until the initialization
of the pool is completed,
and then retry the operation.
Wait until the initialization
of the pool is completed,
and then retry the operation.
Severity Level
W
W
W
W
W
W
W
W