Download Print this page

HP XP P9500 Manual Page 67

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 27 Error codes (part code 1005) (continued)
Part
Error
Error Message
Code
Number
1005
1928
Addition or deletion of paths for LUN0
cannot be done because Host Mode
Option 60 is set to ON. Also, setting
change of Host Mode Option 60 and
path change (addition or deletion) for
LUN 0 cannot be done at the same time.
Execute the changing operations
separately.
1005
1929
Releasing the Host Mode Option 61 is
disabled.
1005
2005
An error occurred during SVP
processing.
1005
2009
An error occurred during SVP
processing.
1005
2010
The LDEV is being used by the host, or
an error occurred in the SVP procedure.
1005
2013
An error occurred during SVP
processing.
1005
2015
An error occurred while connecting to
the storage system.
1005
2032
An error occurred while connecting to
the storage system.
1005
2082
Processing is disabled because the host
is mounted or the device is reserved.
1005
2083
The subsystem status is invalid.
1005
2084
The subsystem status is invalid.
1005
2097
The host specified by the WWN is
performing I/O operations.
1005
2098
The operation cannot be performed,
because the SVP microcode version does
not match the DKCMAIN (subsystem)
microcode version.
1005
2099
The operation cannot be performed,
because an inoperative Processor exists.
1005
2100
An error occurred while connecting to
the storage system. The configuration
may be inconsistent.
1005
2501
The volume cannot be configured as a
command device because the volume
does not have Read/Write attribute.
Recommended Action
Set Host Mode Option 60 to OFF, and
then execute addition or deletion of
paths for LUN 0.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Recovery processing may take about 1
minute. Wait for a while.
If this problem persists, please contact
HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Unmount the host and cancel reservation
of the device. If the host is an AIX host,
unmount the host, and execute the
varyoffvg command.
Check the DKC status and the current
status of the configuration setting. If
necessary, re-execute the setting
operation.
Check the DKC status and the current
status of the configuration setting. If
necessary, re-execute the setting
operation.
Check the settings, then retry the
operation.
When the same problem persists, please
contact HP Technical Support.
Wait a while, then retry the operation.
If the same problem persists. Please
contact HP Technical Support.
Click [Refresh All] on the [File] menu,
then refresh the configuration. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the settings, then retry.
Severity
Level
W
W
W
E
W
W
W
W
W
W
W
W
E
W
W
W
Part code 1005
67

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: