HP XP P9500 Manual page 248

Table 62 Error codes (part code 7005) (continued)
Part Error
Code Number
7005 8560
7005 8561
7005 8562
7005 8563
7005 8564
7005 8565
7005 8566
7005 8567
7005 8568
7005 8569
7005 8570
7005 8571
7005 8572
7005 8573
7005 8574
7005 8575
7005 8576
7005 8577
7005 8578
7005 8579
7005 8580
7005 8581
7005 8582
7005 8583
248 Message (part code group 7nnn)
Error Message
This volume cannot be specified because
it is used as a command device.
The command code is invalid.
The command code sender is invalid.
The volume type is invalid.
The volume type is invalid.
The command code sender is invalid.
The attribute of the reserved volume is
invalid.
The number of effective lists is invalid.
The emulation type is invalid.
The command has been rejected,
because the area of the differential table
or pair table to set pairs is insufficient.
The selected volume does not exist.
The volume is already defined as a
reserved volume.
The volume is already defined as a
P-VOL.
The volume is defined as a source
volume for Auto LUN.
The volume is defined as a target volume
for Auto LUN.
The selected volume is not a reserved
volume.
No reserved volume is available for use.
The number of reserved volumes to be
defined exceeds the maximum.
The P-VOL is already paired with a
backup volume. The P-VOL cannot be
paired with the target volume.
No volume is defined as a reserved
volume.
The specified volume is for backup
servers only.
The specified volume is not for backup
servers only.
The emulation type of the target volume
is being changed.
The RAID level of the specified volume
is not supported.
Recommended Action
Specify a volume that is not used as a
command device.
Please contact HP Technical Support.
Please contact HP Technical Support.
Check the contents, and retry.
Check the contents, and retry.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Specify the volume of the supported
emulation type.
See the section "Planning number of
pairs" in the HP P9000 Business Copy
User Guide for the relation between the
number of pairs that can be created and
the shared memories.
Refresh the window, and retry the
operation.
Check the status of the volume.
Check the status of the volume.
Release the Auto LUN setting.
Release the Auto LUN setting.
Check the status of the volume.
Check the contents, and retry.
Stop the operation of the Reserve volume
setting, or delete the Reserve volume.
Check the contents, and retry.
Define the reserve volume, then retry the
operation.
You cannot use the volume. Specify other
volume, and retry the operation.
Check the contents, and retry.
Wait a while, and retry the operation.
Specify a volume of the supported RAID
level.
Severity
Level
W
E
E
W
W
E
E
E
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W