HP XP P9500 Manual page 34

Table 15 Error codes (part code 00222) (continued)
Part Error
Code Number
00222 106064
00222 106065
00222 106066
00222 106067
00222 106068
00222 106069
00222 106070
00222 106071
00222 106072
00222 106073
00222 106074
00222 106075
34 Message (part code group 0nnn)
Error Message
Failed to change the user group
information.
Failed to delete the user group.
The role of Storage Administrator (View
Only) cannot be removed.
"All Resource Groups Assigned"
becomes enabled.
You cannot remove the selected users,
because "Administrator User Group" will
have no enabled users who have the
local authentication setting.
You cannot remove the selected users,
because they will not belong to any
groups.
The Built-in user cannot be removed.
The selected users could not be removed.
"All Resource Groups Assigned"
becomes disabled. Assign resource
groups.
There are some user groups to which an
unmounted resource group is allocated.
There is no selected resource group.
It is important to backup your settings.
Use the "Download File" window located
on the Control Panel of the Remote Web
Console, and then backup your setting
information.
Recommended Action
Verify the following:
If the specified user group is
registered
If there is no built-in group in the
specified user groups
If the specified resource group is
registered.
Verify the following.
If the specified user group is
registered.
If there is no built-in group in the
specified user groups.
Specify a role other than the Storage
Administrator (View Only), and then retry
the operation.
Click [OK].
Select some users as "Administrator User
Group" has at least one active user who
has the local authentication setting.
Check the number of the groups which
the selected users belong to.
Select the users whose types are not the
Built-in.
You must not perform operations such
as:
Removing a User-created user from a
group again if the user has been
removed from the group
Removing a User-created user from a
group if the user has been deleted
Removing a user belonging to two
groups from one group if the user has
been removed from another group
Click [OK].
Verify the resource groups that are
allocated to user groups.
Verify that there is a specified resource
group.
Click [OK].
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W