Part Code 20121 - HP XP P9500 Manual

Table 94 Error codes (part code 20020) (continued)
Part Error
Code Number
20020 107094
20020 107095
20020 107096
20020 107097
20020 107098
20020 107099
20020 107100
20020 107101
20020 108000

Part code 20121

Table 95 Error codes (part code 20121)
Part Error
Code Number
20121 105001
20121 105002
20121 105003
20121 105004
20121 105005
20121 105006
20121 105007
20121 105008
20121 106001
20121 107021
20121 107022
324 Message (part code group 20nnn)
Error Message
The number of onetime keys has
exceeded the maximum.
Failed to authenticate the user account.
The specified group ID does not exist.
Failed to store the user information.
The user information of the specified
onetime key does not exist.
Failed to get the user information from
the specified onetime key.
The user information of the specified
global session ID does not exist.
Failed to get the user information from
the specified global session ID.
The application failed to start, or it was
terminated forcibly.
Error Message
No table rows are selected.
Two or more table rows are selected.
No table row, or two or more table rows
are selected.
Other than the numeric value is input.
Become the object of the automatic
deletion.
Please specify two digits or four digits
for a value specified for the data pattern.
The re-entered password does not match
the one entered previously.
The re-entered secret does not match the
one entered previously.
There is an error in the input content.
An internal logic error occurred.
An error occurred during SVP
processing.
Recommended Action
Wait for a while, then retry the
operation.
Check the environment.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check the environment.
Check the environment.
Check the environment.
Check the environment.
Check the environment.
If the problem persists despite retrying,
please contact HP Technical Support.
Recommended Action
Select one or more table rows.
Select one table row.
Select one table row.
Input the numeric value.
To continue processing, click [OK]. To
stop processing, click [Cancel].
Check the settings, then retry the
operation.
Verify the settings, and then retry the
operation.
Verify the settings, and then retry the
operation.
Check the content of the error tool tip,
correct the error, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Close the window, refresh it, and then
retry the operation. If the problem
persists, please contact HP Technical
Support.
Severity
Level
E
E
E
E
E
E
E
E
E
Severity
Level
W
W
W
W
i
E
W
W
E
E
E