HP XP P9500 Manual page 174

Table 53 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 68020
6005 68022
6005 68023
6005 68027
6005 68757
6005 68758
6005 68764
6005 68787
6005 68788
6005 68789
6005 68790
6005 68791
6005 68792
174 Message (part code group 6nnn)
Error Message
"Maximum Initial Copy Activities (CU)"
cannot be changed to Enable or
Disable, because there are pairs in
COPY or Pending status.
The specified M-VOL is used as a data
volume of Continuous Access Journal
or Continuous Access Journal Z. The
operation failed because Continuous
Access Journal 3DC & 4x4 Open
Mainframe function is not installed in
the MCU.
The specified R-VOL is used as a data
volume of Continuous Access Journal
or Continuous Access Journal Z. The
operation failed because Continuous
Access Journal 3DC & 4x4 Open
Mainframe function is not installed in
the RCU.
The operation failed because the RCU
does not support the CU number, the
LDKC number or the LU number of the
specified M-VOL.
The Add Pair (Paircreate) operation
failed because the specified R-VOL,
which is a Thin Provisioning volume or
Thin Provisioning Z volume, was
already used by another program
product.
The Add Pair(Paircreate) operation
failed because the specified R-VOL was
a System Disk.
The Add Pair(Paircreate) operation
failed because the specified M-VOL was
a System Disk.
The operation failed because the
Continuous Access Synchronous
function was not installed.
The operation failed because the
External Storage Access Manager
function was not installed.
The Paircreate operation failed because
the Continuous Access Synchronous
function was not installed in the RCU.
The Paircreate operation failed because
the External Storage Access Manager
function was not installed in the RCU.
The operation failed because the
specified volume was not an R-VOL.
The operation failed because the
specified volume was not an External
Storage Access Manager pair volume.
Recommended Action
Confirm that no pairs are in
COPY or Pending status,
then retry the operation.
Install Continuous Access
Journal 3DC & 4x4 Open
Mainframe function to the
MCU.
Install Continuous Access
Journal 3DC & 4x4 Open
Mainframe function to the
RCU.
Check the CU number, the
LDKC number, or the LU
number of the specified
M-VOL.
Select another volume that
is not used by other program
products or cancel the use
of a volume operated by
other program products, and
then retry the operation.
Check whether the specified
R-VOL is a System Disk.
Check whether the specified
R-VOL is a System Disk.
Install the Continuous Access
Synchronous function to the
storage system.
Install the External Storage
Access Manager function to
the storage system.
Install the Continuous Access
Synchronous function to the
RCU.
Install the External Storage
Access Manager function to
the RCU.
Refresh the window, and
confirm whether the
specified volume is an
R-VOL.
Refresh the window, and
confirm whether the
specified volume is an
Severity Level
W
W
W
W
W
W
W
W
W
W
W
W
W