HP XP P9500 Manual page 204

Table 56 Error codes (part code 6505) (continued)
Part Error
Code Number
6505 58329
6505 58333
6505 58334
6505 58335
6505 58336
6505 58337
6505 58338
6505 58340
6505 58341
6505 58342
6505 58343
6505 58344
204 Message (part code group 6nnn)
Error Message
The operation of Add Pair (Paircreate)
or Resume Pair (Pairresync) cannot be
performed, because the data are
remained in the journal cache for the
master journal.
The parameter related to the inflow
cannot be changed, because the
specified journal is a restore journal.
The parameter related to the inflow
cannot be changed, because the status
of the specified journal is neither "Initial"
nor "Stopped."
The timer type cannot be changed,
because the status of the specified
journal is not "Initial."
The specified volume cannot be
registered as a journal volume because
the CLPR number of the specified volume
is different from the CLPR number of the
journal volume that has already been
registered.
The operation failed, because the CLPR
number of the specified primary data
volume was different from the CLPR
number of the journal volume in the
specified master journal.
The operation failed because the CLPR
number of the specified secondary data
volume was different from the CLPR
number of the journal volume in the
specified restore journal group.
The specified volume cannot be used as
a journal volume because the specified
volume is an LUSE volume.
The specified volume cannot be used as
a journal volume because the specified
volume is an external volume.
The specified volume cannot be used as
a journal volume because of a Data
Retention setting or a Volume Retention
setting.
The specified volume cannot be used as
a journal volume because of a Volume
Security for Mainframe setting.
The Add Pair (Paircreate) operation
failed because the specified secondary
data volume is an LUSE volume.
Recommended Action
Please contact HP Technical Support.
Check the attribute of the specified
journal.
Check the status of the specified journal.
Check the status of the specified journal.
Check the CLPR number of the registered
journal volume, and specify the volume
that has the same CLPR number.
Check the CLPR number of the journal
volume in the specified master journal,
then specify the primary data volume
that has the same CLPR number.
Check the CLPR number of the journal
volume in the specified restore journal
group, and specify the secondary data
volume that has the same CLPR number.
Check the specified volume and specify
a non-LUSE volume.
Check the specified volume and specify
a non-external volume.
Check the setting of the volume in the
Data Retention window or the Volume
Retention window.
Check the setting of the specified volume
in the Volume Security for Mainframe
window.
Check the specified secondary data
volume and specify a non-LUSE volume.
Severity
Level
E
W
W
W
W
W
W
W
W
W
W
W