Part Code 8605; Part Code 8610 - HP XP P9500 Manual

Part code 8605

Table 77 Error codes (part code 8605)
Part Error
Code Number
8605 6012
8605 6022
8605 7060
8605 65753
8605 65754
8605 65755
8605 65756
8605 65757
8605 66821
8605 66822
8605 66823

Part code 8610

Table 78 Error codes (part code 8610)
Part Error
Code Number
8610 65758
8610 65759
8610 65760
Error Message
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
Invalid character is included in the e-mail
addresses or the server addresses.
The number of characters specified in an
e-mail address or a server address
exceeds 255 characters.
An attribute of the registered destination
of messages is invalid.
The SMTP authentication is enabled, but
Account or Password is not specified.
The same e-mail addresses are specified.
There is no e-mail address information
file.
The contents of the e-mail address
information file are invalid.
A failure occurred while communicating
with the SMTP server.
Error Message
The field of account or password is left
blank.
When the SMTP authentication is
enabled, your account and password
are required to input.
The field of sender's e-mail address is
left blank.
When the mail notification service is
enabled, sender's e-mail address is
required to input.
The field of destination e-mail address is
left blank.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Confirm the e-mail address or the server
address where the error occurred,
remove the invalid characters, then retry
the registration.
Confirm the e-mail address or the server
address, then retry the registration within
the number of 255 characters.
Register the e-mail address information
file again.
Register an account or a password for
the SMTP authentication.
Remove the duplicated e-mail addresses,
then register it again.
Register the e-mail address information
file again.
Register the e-mail address information
file again.
Check the state of communication with
the SMTP server to solve this problem.
Recommended Action
Enter your account or password.
Enter the sender's e-mail address.
Enter a destination e-mail address.
Severity
Level
E
E
E
E
E
E
W
E
E
E
E
Severity
Level
W
W
W
Part code 8605 301