Download Print this page

HP XP P9500 Manual Page 224

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 56 Error codes (part code 6505) (continued)
Part
Error
Code
Number
6505
68850
6505
68851
6505
68852
6505
68853
6505
68857
6505
68858
6505
68859
6505
68860
6505
68861
6505
68862
6505
68863
6505
68870
6505
68885
224 Message (part code group 6nnn)
Error Message
volume or Thin Provisioning Z volume
that was specified as the secondary data
volume was being initialized.
The operation failed, because the
consistency (CT) group of specified data
volume was being shared with multiple
primary and secondary storage systems,
and "LU" was specified for the [Range].
The operation failed, because the
specified consistency (CT) group was
shared with multiple primary and
secondary storage systems.
The operation failed, because the
specified consistency (CT) group or the
secondary data volume was being
shared with multiple primary and
secondary storage systems. This CT
group or the secondary data volume
cannot be used for Delta resync.
The operation failed, because the
specified journal was shared with
multiple primary and secondary storage
systems.
The operation failed, because a remote
command device has already been
assigned to the specified mirror.
The operation failed, because the
specified mirror was invalid.
The operation failed, because the
specified remote command device was
blocked.
The operation failed, because the serial
numbers between the remote command
device and the mirror did not match.
The operation failed, because the
specified journal was not in the
configuration of 3DC cascade or 3DC
multi target.
The specified remote command device
cannot be assigned to a mirror any
further.
The operation failed, because the
number of assignable remote command
device to a mirror exceeded the
maximum.
The operation failed, because a remote
command device was not assigned to
the specified mirror.
The operation failed, because the
specified volume was a quorum disk.
Recommended Action
Specify "Mirror" for the [Range], then
retry the operation.
Specify another CT group, then retry the
operation.
Check whether the specified CT group
or the secondary data volume was
shared with multiple primary and
secondary storage systems or not.
Specify another journal, then retry the
operation.
Check if a remote command device is
assigned to the specified mirror.
Check the status of the specified mirror.
Check the status of the specified remote
command device.
Check if the serial number of the external
volume that is used as a remote
command device matches the one of the
storage system connected to the mirror.
Check the status of the specified journal.
Specify another remote command
device, then retry the operation.
Check the number of remote command
devices which has been assigned to a
mirror.
Check if a remote command device was
assigned to the specified mirror.
Release the quorum disk, or select
another volume.
Severity
Level
W
W
W
W
W
W
E
W
W
W
W
W
W

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: