Table 28 Error codes (part code 01022) (continued)
Part
Error
Code
Number
01022
105041
01022
105042
01022
105043
01022
105044
01022
105045
01022
105046
01022
105047
01022
105048
01022
105049
01022
105050
01022
105051
01022
105052
01022
105070
01022
105071
01022
105072
01022
105073
01022
105074
01022
105075
01022
105076
01022
105077
72
Message (part code group 1nnn)
Error Message
[Detail] is clicked in the state of selecting
multiple table rows.
[Delete] is clicked without selecting any
row.
The processing cannot be done because
there is no data in the [Selected Host
Groups] table.
[Detail] is clicked without selecting table
rows.
[Detail] is clicked in the state of selecting
multiple table rows.
HBA WWN cannot be converted into
hexadecimal.
The length of the host name is incorrect.
An invalid character is used in the host
name.
You are trying to register the same host
that has already existed as a candidate.
The specified HBA WWN cannot be
registered, because it is already used in
this port.
The specified Host Name cannot be
registered, because it is already used in
this port.
There is no port information on the copy
target.
The same host is specified at the same
time.
The attribute of the specified port is
neither Target nor RCU Target.
The same host cannot be added in the
same port.
[Finish] is clicked without completing the
setting.
All the check boxes are being cleared.
The HBA WWN about to be changed
has already existed in the same port.
The host name about to be changed has
already existed in the same port.
The specified port type is not Fibre Port.
Recommended Action
Select one table row.
Select one or more table rows.
Check if any of target host group to be
set exists in the [Selected Host Groups]
table. When there is not, add host
group(s) and retry the operation. When
there is, close the window(s) and refresh
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
Select one table row.
Select one table row.
Specify the HBA WWN with 16 digits
in hexadecimal.
Enter the host name within 1 to 64
characters.
Remove the invalid characters, then retry.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the check boxes for the items that
you want to change, then retry the
operation.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W