HP XP P9500 Manual page 114

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 40 Error codes (part code 3305) (continued)
Part
Error
Code
Number
3305
1 101
3305
1 103
3305
1 104
3305
1 105
3305
1 1 13
3305
1 142
3305
1 144
3305
1601
3305
1602
3305
1900
3305
1910
3305
191 1
3305
1913
3305
1914
3305
2004
3305
2005
3305
201 1
3305
2015
3305
2022
3305
2081
1 14
Message (part code group 3nnn)
Error Message
An operation is specified for the
uninstalled volume.
An operation is specified for the
uninstalled Parity Group.
Subsystem ID cannot be set alone.
The number of volumes exceeds the
maximum that can be set.
The specified volume is currently used
by Parallel Access Volumes and is not
available for VLL operation.
The specified volume is used as a volume
of Volume Security for Mainframe.
The specified volume is used as a LUSE
volume.
Error happened before the change was
processed. This functionality is not
available. Open Volume Management
is required.
This functionality is not available. Virtual
LVI is required.
Maintenance operation is executed by
the SVP.
The specified volume contains Snapshot
pairs.
The specified volume contains Pool-VOLs.
The setting cannot be made because the
specified LDEV is a remote command
device.
The number of V-VOL(s) has exceeded
the maximum number of V-VOL(s) that
can be set in a disk subsystem.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The status of the disk subsystem requires
maintenance (for example, the subsystem
is blocked, the shared memory is
inconsistent, or some other factor).
An error occurred while connecting to
the subsystem. Please wait for a while,
and then retry the operation.
An error occurred during SVP
processing.
An error occurred during a VLL operation
to add or delete customized volumes.
Recommended Action
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
Request the change of the Subsystem ID
along with the VLL operation.
Check the settings.
Change the volumes ID to specify, or
release the Parallel Access Volumes
setting.
Check the setting of the specified volume.
Check the setting of the specified volume.
Install the necessary program product
license key.
Install the necessary program product.
Wait for the maintenance to complete,
then retry the operation.
Check the setting of the specified volume.
Select another volume.
Check the setting.
Correct the settings, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
A communication error occurs. If the
same error occurs despite retrying,
please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
E
E
E
E
E
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents