HP XP P9500 Manual

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs
HP
P9000 Remote Web Console Messages
Abstract
This document lists the error codes and error messages for HP P9000 Remote Web Console for P9000 disk arrays, and provides
recommended action for the error conditions.
HP Part Number: AV400-96401
Published: September 201 1
Edition: Fifth

Advertising

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

   Summary of Contents for HP XP P9500

  • Page 1

    P9000 Remote Web Console Messages Abstract This document lists the error codes and error messages for HP P9000 Remote Web Console for P9000 disk arrays, and provides recommended action for the error conditions. HP Part Number: AV400-96401 Published: September 201 1 Edition: Fifth...

  • Page 2

    © Copyright 2010, 201 1 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.21 1 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

  • Page 3: Table Of Contents

    Contents 1 P9500 messages and error codes..............6 P9500 messages........................6 Message window format......................6 Advanced message window......................7 Remote Console-Remote Web Console error codes...............9 2 Message (part code group 0nnn)...............10 Part code 0001........................10 Part code 0002........................15 Part code 0003........................17 Part code 0004........................19 Part code 0005........................20 Part code 0006........................20 Part code 0007........................21 Part code 0010........................22...

  • Page 4: Table Of Contents

    6 Message (part code group 4nnn).............119 Part code 4005........................119 Part code 4010........................121 7 Message (part code group 5nnn).............123 Part code 5105........................123 Part code 5107........................125 Part code 51 10........................125 Part code 05121........................125 Part code 05122........................126 Part code 5205........................128 Part code 5210........................143 Part code 5305........................144 Part code 5307........................148 Part code 5310........................148...

  • Page 5: Table Of Contents

    Part code 9205........................310 Part code 9210........................312 Part code 9605........................313 Part code 9610........................316 12 Message (part code group 10nnn)............317 Part code 10010........................317 Part code 10121........................317 Part code 10122........................318 13 Message (part code group 20nnn)............320 Part code 20020........................320 Part code 20121........................324 Part code 20122........................326 Part code 20123........................329 Part code 20222........................332 Part code 20305........................333...

  • Page 6: P9500 Messages And Error Codes, P9500 Messages, Message Window Format

    1 P9500 messages and error codes Unless otherwise specified, the term P9000 in this guide refers to the following disk array: P9500 Disk Array The GUI illustrations in this guide were created using a Windows computer with the Internet Explorer browser.

  • Page 7: Advanced Message Window

    Access Synchronous Z messages only. If you are a Continuous Access Synchronous user, note the following: The word M-VOL in Continuous Access Synchronous Z messages is equivalent to P-VOL in Continuous Access Synchronous messages. The word R-VOL in Continuous Access Synchronous Z messages is equivalent to S-VOL in Continuous Access Synchronous messages.

  • Page 8

    Figure 3 Example of advanced message window 1 At the operation to change multiple settings at once, each result can be seen in the table shown under the message. Click an error code number written in the table that is linked to the changed result of each item to refer to the error.

  • Page 9: Remote Console-remote Web Console Error Codes

    Remote Console-Remote Web Console error codes To find solutions to the Remote Web Console for P9500 errors, see “Error codes (part code 0001)” (page 10) and subsequent tables of this manual or the Troubleshooting chapter in the user guides for the program products causing the errors. “Error codes (part code 0001)”...

  • Page 10: Message (part Code Group 0nnn), Part Code 0001

    2 Message (part code group 0nnn) This chapter includes the error messages with the part code 0001 to 0810. Part code 0001 Table 1 Error codes (part code 0001) Part Error Error Message Recommended Action Severity Code Number Level 0001 1000 An error occurred during SVP If this problem persists, please contact...

  • Page 11

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0001 4007 An error occurred. If this problem Please contact HP Technical Support. persists, please contact HP Technical Support. 0001 4008 An error occurred. If this problem Please contact HP Technical Support.

  • Page 12

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level Do either of the following if two users are displaying the Performance Monitor window or running the Export Tool: Ask one of the users to display another window.

  • Page 13

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0001 5638 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support. 0001 5639 An error occurred during SVP...

  • Page 14

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level persists, please contact HP Technical clear the proxy cache. If that does not Support. solve the problem and this problem persists, please contact HP Technical Support for resolution.

  • Page 15: Part Code 0002

    Table 1 Error codes (part code 0001) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0001 65734 CVAE version information ID is invalid. CVAE version information ID is invalid. Check the setting, and then retry the Check the setting, and then retry the operation.

  • Page 16

    Table 2 Error codes (part code 0002) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0002 2015 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0002 2016 The array is refreshing, or some other Wait, then retry the operation.

  • Page 17: Part Code 0003

    Table 2 Error codes (part code 0002) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0002 7060 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0002 71 1 1 An error occurred during SVP If this problem persists, please contact processing.

  • Page 18

    Table 3 Error codes (part code 0003) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0003 2004 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0003 2005 An error occurred during SVP If this problem persists, please contact processing.

  • Page 19: Part Code 0004

    Table 3 Error codes (part code 0003) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0003 2100 An error occurred while connecting to Click [Refresh All] on the [File] menu, the storage system. The configuration then refresh the configuration. may be inconsistent.

  • Page 20: Part Code 0005, Part Code 0006

    Table 4 Error codes (part code 0004) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0004 6037 The subsystem status is invalid. If the same problem persists despite retrying, please contact HP Technical Support. 0004 8010 The subsystem status is invalid. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 21: Part Code 0007

    Part code 0007 Table 7 Error codes (part code 0007) Part Error Error Message Recommended Action Severity Code Number Level 0007 6012 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support.

  • Page 22: Part Code 0010

    Part code 0010 Table 8 Error codes (part code 0010) Part Error Error Message Recommended Action Severity Code Number Level 0010 6023 An error occurred during processing. If If this problem persists, please contact this problem persists, please contact HP HP Technical Support.

  • Page 23: Part Code 00021, Part Code 00022

    Table 8 Error codes (part code 0010) (continued) Part Error Error Message Recommended Action Severity Code Number Level file will be saved, and also check the free space on the drive. 0010 57103 An error occurred during SVP If this problem persists, please contact processing.

  • Page 24

    Part code 01 10 Table 1 1 Error codes (part code 01 10) Part Error Error Message Recommended Action Severity Code Number Level 01 10 5030 The displayed information has not been Specify the data to be registered in the changed.

  • Page 25: Part Code 0190, Part Code 00221

    Table 1 1 Error codes (part code 01 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level If configuration changes have been made incorrectly, retry the operation. 01 10 59002 The storage system is in internal process, Wait for a while, then click [OK] and or some other user is changing the change the mode to Modify.

  • Page 26: Part Code 00122, Part Code 00222

    Part code 00122 Table 14 Error codes (part code 00122) Part Error Error Message Recommended Action Severity Code Number Level 00122 105260 The free space for storing audit log files Download the Audit Log. is running out. Usage Rate {0}% 00122 105261 The free space for storing audit log files...

  • Page 27

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 105220 The re-entered new password does not Check the setting(s). match the new password entered previously. 00222 105221 No check box is selected. Check the setting(s).

  • Page 28

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 105331 The value that can be input to the Set a value within the range. number of retries of authentication server is 1 to 50.

  • Page 29

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 105351 Other than the numeric characters are Enter with numeric characters. input to the specified primary port number of authentication server. 00222 105352 The value that can be input to the...

  • Page 30

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 105373 Invalid characters are used in the Enter with alphanumeric characters and specified realm name of authentication symbols( - . ). server.

  • Page 31

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 105393 Other than the numeric characters are Enter with numeric characters. input to the specified timeout value of external user group mapping. 00222 105394 The value that can be set for the timeout...

  • Page 32

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 10541 1 Invalid characters are used in the Enter with alphanumeric characters and specified secondary host name of symbols( - . ). external user group mapping.

  • Page 33

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level specified user group, then retry the operation. 00222 106051 The number of user groups that can be Decrease the number of user groups that associated with a user has reached the are associated with the user, then retry maximum.

  • Page 34

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 106064 Failed to change the user group Verify the following: information. If the specified user group is registered If there is no built-in group in the specified user groups If the specified resource group is registered.

  • Page 35: Part Code 0290

    Table 15 Error codes (part code 00222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00222 106076 The password cannot be changed due If the specified user is a local user, to one of the following reasons. verify the registered status of the user.

  • Page 36

    Table 16 Error codes (part code 0290) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0290 5090 The RMI time-out period is too short Reply to this message. compared to the time to keep the RMI object. 0290 5100 The Polling period is too long compared...

  • Page 37

    Table 16 Error codes (part code 0290) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0290 6150 Failed to open the user account list file. If the same error occurs again despite retrying, please contact HP Technical Support.

  • Page 38

    Table 16 Error codes (part code 0290) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0290 9005 Are you sure you want to restore these Reply to this message. files? 0290 561 1 1 File name is not specified. Specify the file name, then retry the operation.

  • Page 39: Part Code 0305

    Table 16 Error codes (part code 0290) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0290 5661 1 Failed to create the file. If this problem persists, please contact HP Technical Support. 0290 56621 Failed to create the file. If this problem persists, please contact HP Technical Support.

  • Page 40: Part Code 0310

    Table 17 Error codes (part code 0305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0305 6023 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0305 7060 An error occurred during SVP If this problem persists, please contact processing.

  • Page 41: Part Code 0405

    Table 18 Error codes (part code 0310) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0310 5040 The maximum number of IP Address is Reduce the number, and retry. 0310 5041 The maximum number of Community Reduce the number, and retry. name is 32.

  • Page 42

    Table 19 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0405 5073 To install/remove this program product, Install or remove the related program you must install/remove another program product first. product first. Program Product Name >>>>>...

  • Page 43

    Table 19 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level Cont Access Journal 3DC & 4x4 Open MF >>>>> Continuous Access Journal Z Cont Access Journal 3DC & 4x4 Open MF >>>>> Continuous Access Journal Hyper Parallel Access Volumes >>>>>...

  • Page 44

    Table 19 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0405 5525 You cannot remove Data Retention, Remove the "S-VOL disable" setting. because "S-VOL disable" or "Reserve" setting remains. 0405 6012 An error occurred during SVP If this problem persists, please contact processing.

  • Page 45

    Table 19 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level Replacing the PC Turning on, then off the DKC (care should be taken.) 0405 8003 The subsystem status is invalid. Isolate the abnormal section following the procedure below: Rebooting the PC.

  • Page 46: Part Code 0407, Part Code 0410

    Table 19 Error codes (part code 0405) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0405 57094 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 0405 57097 An error occurred during SVP If this problem persists, please contact processing.

  • Page 47: Part Code 0605

    Table 21 Error codes (part code 0410) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0410 55002 A file name is invalid due to one of the Check the file name and retry the following reasons: operation. The file name is not specified.

  • Page 48

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 2095 Another maintenance processing or Wait for a while, then retry the failure handling is in progress. operation. 0605 2200 The Concurrent Copy or the Compatible Cancel the Concurrent Copy job or XRC operation is in progress in the target delete a Compatible XRC pair via the...

  • Page 49

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 2522 The volume is reserved by Auto LUN. Release the definition of a reserved volume, then retry the operation. 0605 3003 An error occurred during SVP If this problem persists, please contact processing.

  • Page 50

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 8958 An error occurred on the DKC side. If this problem persists, please contact HP Technical Support. 0605 8966 An error occurred on the DKC side. If this problem persists, please contact HP Technical Support.

  • Page 51

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level Systems or the Disconnect External Volumes, put the external volume in Volume is in progress. normal status, then retry the operation. 0605 58410 The cache mode cannot be changed Release the bind mode setting, then retry...

  • Page 52

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 65799 There are no setting lines of Check the contents of the spreadsheet. NewPathGroup. 0605 65800 The number of NewPathGroup setting Check the contents of the spreadsheet.

  • Page 53

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level corresponding to that of another external volume in the same External Path Group. 0605 66520 Mainframe volume and intermediate Check the mounted packages. volume cannot be set because the package for mainframe system is not mounted.

  • Page 54

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 66744 It is not set within the range where LDEV Check the setting of LDEV capacity. capacity can be used. 0605 66748 A value different from SSID that has Check the setting of SSID.

  • Page 55

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 0605 68901 An external volume was not able to be Check the status of the mapping path recovered. and resolve the root cause of blockade, then retry the operation.

  • Page 56: Part Code 00622

    Table 22 Error codes (part code 0605) (continued) Part Error Error Message Recommended Action Severity Code Number Level contains the external volume that belongs to a resource group to which the user has no access right. 0605 78056 The operation cannot be done because Verify the resources allocation for the the external volume which belongs to a user with security administrator role.

  • Page 57

    Table 23 Error codes (part code 00622) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00622 105239 The number of alternate paths that can Check the number of selected alternate be set to an external volume exceeds the paths.

  • Page 58

    Table 23 Error codes (part code 00622) (continued) Part Error Error Message Recommended Action Severity Code Number Level right is connected to the specified external path group. 00622 105269 The specified external volume cannot be Verify the resources allocation for the used because the user has no access user with security administrator role.

  • Page 59

    Table 23 Error codes (part code 00622) (continued) Part Error Error Message Recommended Action Severity Code Number Level 00622 106055 The selected emulation type cannot be Release the command device, or select set because a command device is set to another volume.

  • Page 60: Part Code 0710

    Table 23 Error codes (part code 00622) (continued) Part Error Error Message Recommended Action Severity Code Number Level despite retrying, please contact HP Technical Support. 00622 107003 The processing cannot continue due to Refresh the window, then retry the an internal logic contradiction. operation.

  • Page 61: Part Code 00722, Part Code 0810

    Part code 00722 Table 25 Error codes (part code 00722) Part Error Error Message Recommended Action Severity Code Number Level 00722 105423 A radio button for Primary Server is not Check the setting. selected. 00722 105424 A radio button for Secondary Server is Check the setting.

  • Page 62: Message (part Code Group 1nnn), Part Code 1005

    3 Message (part code group 1nnn) This chapter includes the error messages with the part code 1005 to 1310. Part code 1005 Table 27 Error codes (part code 1005) Part Error Error Message Recommended Action Severity Code Number Level 1005 1002 The specified volume cannot be set as a Select another volume.

  • Page 63

    Table 27 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level and request the configuration information setting again. 1005 1022 Invalid host mode. The configuration information has been changed already. Check the settings, and request the configuration information setting again.

  • Page 64

    Table 27 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 1 108 The following volumes cannot be Check the setting, then retry the specified when you change the operation. command device configurations: Volumes reserved by Auto LUN Volumes other than the open-system volumes (including unmounted...

  • Page 65

    Table 27 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 1 135 When setting the port information (Fibre Check the setting(s), then retry the Address/Fibre Topology/Channel operation. Speed), multiple change instructions are set to the same port.

  • Page 66

    Table 27 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 1356 You could not add the host group to the To add the host group, change the initiator or external port. attribute of the specified port to Target or RCU Target.

  • Page 67

    Table 27 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 1928 Addition or deletion of paths for LUN0 Set Host Mode Option 60 to OFF, and cannot be done because Host Mode then execute addition or deletion of Option 60 is set to ON.

  • Page 68

    Table 27 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 2504 No settings can be made because of a Release the reserved attribute of the volume reserved for RAID Manager. target volume by using Data Retention. 1005 3002 An error occurred during SVP...

  • Page 69

    Table 27 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1005 55561 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 1005 55566 An error occurred during SVP If this problem persists, please contact processing.

  • Page 70: Part Code 01022

    Table 27 Error codes (part code 1005) (continued) Part Error Error Message Recommended Action Severity Code Number Level a resource group to which the port belongs. 1005 7651 1 The specified host group cannot be used Verify the resources allocation for the because the user has no access right to user with security administrator role.

  • Page 71

    Table 28 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 105021 No more HBA WWN can be registered, Check the setting(s). because the number of registered HBA WWNs has reached the maximum. 01022 105022 The selected information cannot be...

  • Page 72

    Table 28 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 105041 [Detail] is clicked in the state of selecting Select one table row. multiple table rows. 01022 105042 [Delete] is clicked without selecting any Select one or more table rows.

  • Page 73

    Table 28 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 105079 Changing to the external or the initiator Check the setting(s). port cannot be done, because a host group other than Host Group 0 is set. 01022 105080 The specified port cannot be changed...

  • Page 74

    Table 28 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level name is used in the same port, or, it is used in the item that has been moved in the [Selected Host Groups] table. 01022 105209 The host mode is left blank.

  • Page 75

    Table 28 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level If the same problem persists despite retrying, please contact HP Technical Support. 01022 106503 The process cannot be continued, Refresh the window, then retry the because there is no necessary data for operation.

  • Page 76

    Table 28 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 107001 The processing cannot continue due to Refresh the window, then retry the an internal logic contradiction. operation. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 77: Part Code 1305

    Table 28 Error codes (part code 01022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 01022 108012 The specified LDEV is a pool volume. Check the setting(s). 01022 108013 The specified LDEV is a V-VOL. Check the setting(s). 01022 108014 The specified LDEV is a remote command...

  • Page 78: Part Code 1310

    Table 29 Error codes (part code 1305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1305 66572 Declaration is invalid. Check the contents of the spreadsheet. 1305 66573 The number of lines or the number of Check the contents of the spreadsheet. characters in one line exceeds the maximum number.

  • Page 79

    Table 30 Error codes (part code 1310) (continued) Part Error Error Message Recommended Action Severity Code Number Level 1310 69048 Insufficient permission to operate this. The following role is required for this operation. Storage Administrator (Initial Configuration) Contact the security manager, and register the user to User Group who has a necessary role.

  • Page 80: Message (part Code Group 2nnn), Part Code 2005

    4 Message (part code group 2nnn) This chapter includes the error messages with the part code 2005 and 2010. Part code 2005 Table 31 Error codes (part code 2005) Part Error Error Message Recommended Action Severity Code Number Level 2005 1002 The specified volume cannot be set as a Select another volume.

  • Page 81

    Table 31 Error codes (part code 2005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 2005 1 137 Failed to form a LUSE volume because The configuration information has been the number of LUSE volumes exceeds the changed already.

  • Page 82

    Table 31 Error codes (part code 2005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 2005 1925 The combination order of LUSE volume Check the settings. is incorrect. 2005 2005 An error occurred during SVP If this problem persists, please contact processing.

  • Page 83

    Table 31 Error codes (part code 2005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 2005 5877 The setting cannot be done because you All the resource group IDs that are set to have no access right to the subject the storage system must be assigned to resource group.

  • Page 84: Part Code 2010

    Part code 2010 Table 32 Error codes (part code 2010) Part Error Error Message Recommended Action Severity Code Number Level 2010 5030 The LUSE volume cannot be released Correct the settings, then retry. because the access attribute of the specified volume is not Read/Write. 2010 5032 There are no LDEVs to set the LUSE top...

  • Page 85: Message (part Code Group 3nnn), Part Code 3005

    5 Message (part code group 3nnn) This chapter includes the error messages with the part code 3005 to 3305. Part code 3005 Table 33 Error codes (part code 3005) Part Error Error Message Recommended Action Severity Code Number Level 3005 1910 The specified volume contains Snapshot Check the setting of the specified...

  • Page 86

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level Replacement of an OEM drive microprogram is in progress LDEV Shredding is in progress Therefore the specified operation cannot be executed. 3005 2200 The Concurrent Copy or the Compatible If the Concurrent Copy or the Compatible...

  • Page 87

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 2518 A pair of Business Copy, Business Copy Split the pair, then retry the operation. Z, or Snapshot is defined. If a reserve volume is defined, cancel the reservation.

  • Page 88

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 7060 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 3005 71 1 1 An error occurred during SVP If this problem persists, please contact processing.

  • Page 89

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 55516 This function is not available, because Install the program product. the program product is not installed. 3005 55517 The specified volume is used as a Specify another volume.

  • Page 90

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 58470 The operation cannot be done, because Add some Pool-VOL, or decrease the the usage of the specified Pool is 100% snapshot data by restoring or deleting (full).

  • Page 91

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level maintained is in PSUS status or being restored. 3005 58626 A Snapshot pair is defined. Cancel the pair definition, then retry the operation.

  • Page 92

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level or Quick Restore is not in the operation, then retry the operation. 3005 65767 The specified volume contains a quorum Check the specified volume. disk.

  • Page 93

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 68798 Failed to delete the pool. When the pool cannot be deleted, do the following: Pool cannot be deleted when: Check the installation status of the The V-VOL management area is not V-VOL management area, when the initialized.

  • Page 94

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 68823 The specified volume is currently used Wait until the process of Auto LUN is by Auto LUN. completed, then retry the operation. If this problem persists, please contact HP Technical Support.

  • Page 95

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 78009 You cannot expand the V-VOLs for the Change the setting to not use the volumes volumes that are being used in the of the following program products as a following program products: target of expanding V-VOL, and then...

  • Page 96

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 78020 The operation cannot be executed, You cannot stop shrinking pools. Wait because the available period to stop until pools are shrunk. shrinking pools has elapsed.

  • Page 97

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 78042 The operation cannot be executed Wait until the pool is shrunk or the tier because the pool where the Thin is relocated, or abort it.

  • Page 98

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 78060 The multi tier pool cannot be disabled Check the configuration of the supported because the RAID level of each tier is RAID levels, then retry the operation.

  • Page 99: Part Code 3010, Part Code 03022

    Table 33 Error codes (part code 3005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3005 781 1 1 External volumes with mixed cache Verify the cache mode of the subject mode setting, enabled and disabled, external volumes. cannot be used as pool volumes in a THP pool.

  • Page 100

    Table 35 Error codes (part code 03022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03022 105138 The specified LDEV is a reserved volume Check the setting(s). of Auto LUN. 03022 105139 The selected LDEV has been set to a Check the setting(s).

  • Page 101

    Table 35 Error codes (part code 03022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03022 105164 LDEVs with different emulation types are Check the setting(s). selected. 03022 105165 LDEVs with different RAID levels are Check the setting(s). selected.

  • Page 102

    Table 35 Error codes (part code 03022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03022 105186 No more V-VOL can be added to the Check the setting(s). selected pool. 03022 105187 A pool in the abnormal state is selected. Check the setting(s).

  • Page 103

    Table 35 Error codes (part code 03022) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03022 105271 The number of free spaces that exist in Select the free spaces again from the the selected parity group exceeds the Select Free Space window.

  • Page 104: Part Code 03121, Part Code 03122

    Part code 03121 Table 36 Error codes (part code 03121) Part Error Error Message Recommended Action Severity Code Number Level 03121 109205 Are you sure you want to initialize all To continue the processing, click [OK]. the THP pools? Otherwise, click [Cancel]. Part code 03122 Table 37 Error codes (part code 03122) Part...

  • Page 105

    Table 37 Error codes (part code 03122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03122 106019 The allocation cannot be done from the Specify a pool ID that is smaller than the specified pool ID. one specified before, then retry the operation.

  • Page 106

    Table 37 Error codes (part code 03122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03122 106036 The operation cannot be executed, Check the state of the specified pool because the specified pool volumes volumes, then retry the operation. contain an abnormal pool volume.

  • Page 107

    Table 37 Error codes (part code 03122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03122 106095 The operation cannot be done because Check the configuration of the pools. the configuration of the specified pools does not meet the conditions below. The smart pool is enabled.

  • Page 108: Part Code 3205

    Table 37 Error codes (part code 03122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 03122 107023 The processing cannot continue due to Refresh the window, then retry the an internal logic contradiction. operation. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 109

    Table 38 Error codes (part code 3205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3205 5013 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 3205 5099 An error occurred during SVP If this problem persists, please contact processing.

  • Page 110

    Table 38 Error codes (part code 3205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3205 56516 The configuration of Continuous Access Release the configuration definition for Synchronous or Continuous Access Continuous Access Synchronous or Synchronous Z is defined. Continuous Access Synchronous Z, then retry the operation.

  • Page 111

    Table 38 Error codes (part code 3205) (continued) Part Error Error Message Recommended Action Severity Code Number Level package for mainframe system is not mounted. 3205 66747 The value of SSID is not set within the Check the setting of SSID. available range.

  • Page 112: Part Code 03222

    Table 38 Error codes (part code 3205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3205 78061 The specified emulation type is different Change the emulation type to be set to from that of the pool specified to the volume.

  • Page 113: Part Code 3305

    Table 39 Error codes (part code 03222) (continued) Part Error Error Message Recommended Action Severity Code Number Level environment. Verify if the system is affected or not. 03222 105433 Reclaim Zero Pages cannot be done to Check the setting(s). the TSE volume. 03222 105434 The TSE volume and the Thin...

  • Page 114

    Table 40 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 1 101 An operation is specified for the Correct the settings, then retry the uninstalled volume. operation. 3305 1 103 An operation is specified for the Correct the settings, then retry the uninstalled Parity Group.

  • Page 115

    Table 40 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level Please wait for a while, and then retry To perform a VLL operation on an the operation. external volume, check the status of the path to the external volume.

  • Page 116

    Table 40 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 2205 Devices to be maintained include journal Delete all pairs to which the journal volumes. volumes belong. 3305 2515 One of the following is defined: a Release the pair definition or delete Remote Copy pair, a Continuous Access command devices defined by Business...

  • Page 117

    Table 40 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 6022 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 3305 6023 An error occurred during SVP If this problem persists, please contact processing.

  • Page 118

    Table 40 Error codes (part code 3305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 3305 65790 The specified volume includes a remote Check the specified volume. command device being used by a mirror of the journal group. 3305 68802 The specified volume includes a system...

  • Page 119: Message (part Code Group 4nnn), Part Code 4005

    6 Message (part code group 4nnn) This chapter includes the error messages with the part code 4005 and 4010. Part code 4005 Table 41 Error codes (part code 4005) Part Error Error Message Recommended Action Severity Code Number Level 4005 5010 An error occurred during SVP If this problem persists, please contact...

  • Page 120

    Table 41 Error codes (part code 4005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 4005 55245 The number of cache residency areas set Check the settings, then retry the for the CLPR exceeds the maximum operation. available number of cache residency areas.

  • Page 121: Part Code 4010

    Table 41 Error codes (part code 4005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 4005 55576 An LDEV number that does not apply to Check the setting. the selected CU group has been specified. 4005 56542 The prestaging is not executed because To use the prestaging function, set the the prestaging area does not exist.

  • Page 122

    Table 42 Error codes (part code 4010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 4010 2080 Prestaging not completed. Wait a while, click [Refresh], and change the same configuration again. Check the DKC status. If the same error occurs, please contact HP Technical Support.

  • Page 123: Message (part Code Group 5nnn), Part Code 5105

    7 Message (part code group 5nnn) This chapter includes the error messages with the part code 5105 to 5307. Part code 5105 Table 43 Error codes (part code 5105) Part Error Error Message Recommended Action Severity Code Number Level 5105 2002 An error occurred during SVP If this problem persists, please contact...

  • Page 124

    Table 43 Error codes (part code 5105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5105 6023 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 5105 6036 An error occurred during SVP If this problem persists, please contact processing.

  • Page 125: Part Code 5107, Part Code 05121

    Table 43 Error codes (part code 5105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5105 66016 A monitoring switch cannot be enabled Change the gathering interval, and retry with the specified gathering interval. the operation. 5105 66017 An error occurred during SVP If this problem persists, please contact...

  • Page 126: Part Code 05122

    Table 46 Error codes (part code 05121) (continued) Part Error Error Message Recommended Action Severity Code Number Level 05121 105003 No table row, or two or more table rows Select one table row. are selected. 05121 109001 Are you sure you want to remove the To continue the processing, click [OK].

  • Page 127

    Table 47 Error codes (part code 05122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 05122 1051 13 The real time graph display will end due Retry the operation if you need the real to changing the monitoring switch. time graph display.

  • Page 128: Part Code 5205

    Table 47 Error codes (part code 05122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 05122 107004 The processing cannot continue due to Retry the operation. If the same problem an internal logic contradiction. occurs again, close the windows, refresh it, then retry again.

  • Page 129

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 1085 The volume(s) are already used by Auto Retry the same operation. If nothing LUN. changes, please contact HP Technical Support. 5205 1086 The RAID level of the target volume is not...

  • Page 130

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 1209 Auto LUN does not support the volume(s). Retry the same operation. If nothing changes, please contact HP Technical Support. 5205 1210 The shared memory to set a plan is Install the shared memory if it is possible.

  • Page 131

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 1222 The number of the Business Copy Z or See Supported and prohibited source Business Copy pair volumes has reached and target volumes" in the HP P9000 the maximum.

  • Page 132

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level Synchronous Z, or External Storage Access Manager. 5205 1236 The RAID level of the target volume is not Retry the same operation. If nothing supported.

  • Page 133

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 201 1 The disk subsystem is busy. Please wait Release the Remote Copy Pair. for a while, and then retry the operation. 5205 2024 The controller detected the blockade...

  • Page 134

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 6001 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 5205 6012 An error occurred during SVP If this problem persists, please contact processing.

  • Page 135

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 7404 Failed to get information from Retry the same operation several times. hihsmpgr.ini. The file may not exist in If the same error occurs, please contact the specified directory.

  • Page 136

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 7420 There is insufficient Auto LUN data to Retry the same operation several times. create migration plans. Check the If the same error occurs, please contact following: HP Technical Support.

  • Page 137

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 8971 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 5205 55059 The specified volumes cannot be used Specify the other volumes.

  • Page 138

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 55432 The specified volumes are already being Confirm the setting of the specified used by Compatible FlashCopy or volume. Compatible FlashCopy SE. 5205 55433 The specified volumes are already being...

  • Page 139

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 55598 The specified volume is used as a Delta Check the setting of the specified volume. resync volume for Continuous Access Journal or Continuous Access Journal Z.

  • Page 140

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 65674 The specified volume(s) are already Check the setting of the specified volume. being used as of Thin Provisioning volume (THP V-VOL) (s). 5205 65697 The volume specified as a migration...

  • Page 141

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 65715 Migration cannot be executed because Check the setting of the specified volume. it is a migration between a Thin Provisioning volume and a normal volume that contains a component of a LUSE volume 5205...

  • Page 142

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 75018 The volume specified as a migration Specify another volume. source cannot be used because its emulation type is 3390-V. 5205 75019 The volume specified as a migration Specify another volume.

  • Page 143: Part Code 5210

    Table 48 Error codes (part code 5205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5205 76505 The LDEV that is specified as a reserved Verify the resources allocation for the volume cannot be used because the user user with security administrator role.

  • Page 144: Part Code 5305

    Table 49 Error codes (part code 5210) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5210 59071 This migration plan extends across To continue processing, click [OK]. To multiple SLPRs. If you perform this stop processing, click [Cancel]. operation, the storage partition administrator will become unable to operate.

  • Page 145

    Table 50 Error codes (part code 5305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5305 5010 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 5305 5013 An error occurred during SVP Retry the same operation.

  • Page 146

    Table 50 Error codes (part code 5305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5305 6051 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 5305 71 1 1 An error occurred during SVP If this problem persists, please contact processing.

  • Page 147

    Table 50 Error codes (part code 5305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5305 56526 The resources of other SLPR(s) cannot be An error occurred during processing. If accessed. this problem persists, please contact HP Technical Support.

  • Page 148: Part Code 5307, Part Code 5310

    Table 50 Error codes (part code 5305) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5305 75040 This functionality is not available because Install the necessary program product. Performance Control is not installed. 5305 76510 The specified port cannot be used Verify the resources allocation for the because the user has no access right to user with security administrator role.

  • Page 149

    Table 52 Error codes (part code 5310) (continued) Part Error Error Message Recommended Action Severity Code Number Level (You cannot specify 0 for all the 16 characters.) 5310 5067 The maximum value is not set for the Set the maximum value for the non-priority port.

  • Page 150

    Table 52 Error codes (part code 5310) (continued) Part Error Error Message Recommended Action Severity Code Number Level 5310 9079 The Performance Control group is To continue processing, click [OK]. To deleted because no WWN is registered stop processing, click [Cancel]. in the Performance Control group.

  • Page 151: Message (part Code Group 6nnn), Part Code 6005

    8 Message (part code group 6nnn) This chapter includes the error messages with the part code 6005 to 6810. Part code 6005 Table 53 Error codes (part code 6005) Part Error Error Message Recommended Action Severity Level Code Number 6005 5013 An error occurred during SVP If this problem persists,...

  • Page 152

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8700 Please retry operation. Retry the operation. 6005 8701 Logical Path between the MCU and the A logical path does not exist RCU is not active.

  • Page 153

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number been recovered. Two ways to recover paths are: (a) Execute ESTPATH from the host console, or (b) First delete the path(s) from the SVP, then re-add them.

  • Page 154

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8724 Specified number of paths is less than The specified number of the minimum specified on RCU Option paths is less than the screen.

  • Page 155

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number occurs, please contact HP Technical Support. 6005 8736 The specified RCU or SSID contains Delete all Remote Copy some Remote Copy volume pairs. volume pairs of the specified RCU or SSID, and retry the operation.

  • Page 156

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number copying data, retry the operation after the process is completed. 6005 8745 A volume cannot be used as an R-VOL Select another volume. when: it is used by Compatible XRC.

  • Page 157

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8756 MCU disk array cache is not active. Check the storage system cache status of the MCU from the host. If it is off, set it on and retry.

  • Page 158

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8768 The RCU is still in another Remote Copy The RCU containing the condition. R-VOL is being used as the RCU for Continuous Access Synchronous.

  • Page 159

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number memory, then retry the operation. 6005 8779 Continuous Access Synchronous or Confirm the controller type External Storage Access Manager is of the RCU. not supported under the RCU controller type.

  • Page 160

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number A reserved volume of Business Copy Z or Business Copy. A volume used in Business Copy Z or Business Copy in Reverse Copy status.

  • Page 161

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number same group being changed to simplex/suspend status in RCU. After a few minutes, refresh and check the Continuous Access Synchronous window. If specified volume is in a permissible status, retry the operation.

  • Page 162

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8827 Please wait a few minutes and retry the Retry the operation in a few Add Pair(Paircreate)/Resume minutes. Pair(Pairresync). If this problem persists, select the volumes where the error occurred, execute the Delete Pair (Pairsplit-S) command...

  • Page 163

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8839 Invalid RCU serial number, SSID, Link Check the serial number, Address or Controller ID. SSID, link address and controller ID of the RCU, and set the correct value.

  • Page 164

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number minutes later, refresh the window, confirm if the specified volumes are in the permissible status, then retry the operation. 6005 8849 Specified volume is not part of Remote The specified volume is not Copy pair (Not in Duplex(PAIR), part of a Continuous Access...

  • Page 165

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8861 An internal error occurred. Please contact HP Technical Support. 6005 8862 Please wait a few minutes and retry the The delete pair (Pairsplit-S) Delete Pair(Pairsplit-S) operation.

  • Page 166

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8891 Logical paths exist on the MCU port. Delete the LUs defined on the specified port, then retry the operation. 6005 8892 R-VOLs exist on the RCU port.

  • Page 167

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8906 No more space is left in RCU for If the extended shared differential management. memory (SM #2) is not installed in RCU, install the shared memory to RCU according to the installation instruction of the extended...

  • Page 168

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number Copy Z T-VOL/reserved volume or a reserved volume of Auto LUN. 6005 8924 Logical paths exist on the RCU port. Delete the LUs defined on the specified port, then retry the operation.

  • Page 169

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8944 The specified R-VOL is not available Check the status of the according to the attribute of the R-VOL specified R-VOL. changed by Data Retention.

  • Page 170

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 8982 You cannot create a pair, because the Specify the volume that can specified M-VOL is a command device. be used to create a pair, then retry the operation.

  • Page 171

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number contact HP Technical Support. 6005 58319 A pair cannot be created because the Select another volume, and specified M-VOL is used by Continuous retry the operation.

  • Page 172

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 58452 The operation failed because the Check the licensed capacity licensed capacity of Open System of Open System Array Array Management on the RCU side Management on the RCU was insufficient or Open System Array side, or confirm whether...

  • Page 173

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 58568 A pair cannot be created because the Confirm that the shredding specified M-VOL is being shredded by has completed in the Data Data Retention.

  • Page 174

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 68020 "Maximum Initial Copy Activities (CU)" Confirm that no pairs are in cannot be changed to Enable or COPY or Pending status, Disable, because there are pairs in then retry the operation.

  • Page 175

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number External Storage Access Manager pair volume. 6005 68793 The Reverse Resync operation failed Refresh the window, and because the status of the specified confirm whether the status of volume was not SSWS.

  • Page 176

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 68827 The operation failed, because there was The serial number of the an error in the specified parameter. local DKC cannot be set as the serial number of the other DKC.

  • Page 177

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number that is specified as the R-VOL was being initialized. 6005 68872 The operation failed, because the Check the volume setting. specified volume was not a volume of External Storage.

  • Page 178

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number 6005 68891 The operation failed, because the Confirm the serial numbers following specified parameters did not of MCU and RCU, and the match the information in the quorum quorum disk ID.

  • Page 179: Part Code 6007, Part Code 6010

    Table 53 Error codes (part code 6005) (continued) Part Error Error Message Recommended Action Severity Level Code Number a resource group to which the port belongs. 6005 78001 The operation failed, because the Check the microcode version current microcode version does not of the storage system.

  • Page 180

    Table 55 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 5012 The Error Level value is invalid. Specify Correct the specified contents, and retry. the correct value. 6010 5013 The Fence value is invalid. Specify the Correct the specified contents, and retry.

  • Page 181

    Table 55 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 8101 The system cannot apply the new Click [Refresh], and retry. configuration. Do you want to refresh? 6010 8928 An error occurred when copying started. Click [Yes] to recover from the error condition.

  • Page 182

    Table 55 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 9102 Do you want to apply? Click [OK] to execute the operation. 6010 9103 Do you want to change? Not used. 6010 9104 Do you want to change the mode?

  • Page 183

    Table 55 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 9126 The script is running now. Are you sure To terminate the script, click [OK]. you want to terminate the script? Otherwise, click [Cancel].

  • Page 184

    Table 55 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 931 1 All SSIDs which you set have already Since all the added SSIDs are been registered. This operation will overlapped, the operation of adding terminate because there is no SSID which SSIDs cannot be executed.

  • Page 185

    Table 55 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 5901 1 Are you sure you want to output the %s To output the file, click [Yes]. Otherwise, file? click [No]. 6010 59012 The %s file does not exist.

  • Page 186

    Table 55 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 65773 The serial number and the controller ID Select a RCU and a quorum disk ID that of the RCU registered in a quorum disk have the same serial number and the do not correspond with the specified controller ID, then retry the operation.

  • Page 187: Part Code 6505

    Table 55 Error codes (part code 6010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6010 69072 The operation cannot be executed, Install the External Storage Access because the External Storage Access Manager program product. Manager is not installed. 6010 69076 Are you sure you want to delete the...

  • Page 188

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 7060 An error occurred during SVP If the same error occurs despite retrying, processing. please contact HP Technical Support. 6505 71 1 1 An error occurred during SVP If the same error occurs despite retrying, processing.

  • Page 189

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8708 The pair status of the secondary data Refresh the window, and check the pair volume is incorrect. status. If possible, retry the operation on the secondary data volume.

  • Page 190

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8727 The number of minimum paths exceeds Do either of the following to recover from the number of normal paths. the error: If the error code is 100c, add normal paths, then set the minimum number of paths.

  • Page 191

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8736 The specified remote storage system Delete data volume pairs of the specified contains journals or data volume pairs remote storage system. Then delete for remote copy operations.

  • Page 192

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8753 An internal error occurred. Check the SSB log, then contact HP Technical Support. 6505 8757 One side of the cache or the shared Check the status of the cache and the memory is blocked in the primary shared memory in the primary storage...

  • Page 193

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level A Business Copy volume in the Reverse Copy status A Business Copy Z volume in the Reverse Copy status 6505 8819 The specified secondary data volume Check the status of the secondary data must not be: volume.

  • Page 194

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8890 The specified port is being initialized. Wait until the initialization of the port ends, and retry the operation. 6505 8891 Logical paths exist on the port.

  • Page 195

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 8934 The Add Pair (Paircreate) operation Check the configuration of the specified failed because the specified secondary secondary data volume. data volume was a NAS system volume. 6505 8936 The Paircreate (Add Pair) operation...

  • Page 196

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58012 Invalid parameter (number of initial copy Check the specified number of initial activities). copy activities. 6505 58013 The specified volume does not exist or Check the status of the specified volume.

  • Page 197

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58032 The threshold for starting creation of Ensure that the threshold for starting synchronous journal must be larger than creation of synchronous journal is larger the threshold for ending creation of than the threshold for ending creation of synchronous journal.

  • Page 198

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58075 The specified serial number is incorrect. Check the specified serial number. 6505 58078 The specified volume does not exist or Check the status of the specified volume.

  • Page 199

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58093 The specified primary data volume is Identify the journal where the specified already registered in another journal. primary data volume is registered. 6505 58094 The specified primary data volume...

  • Page 200

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level Access Journal Z to the remote storage system. 6505 58106 The operation failed because the Confirm the following items about the specified data volumes were in one of specified primary data volume and the following status: secondary data volume.

  • Page 201

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58272 A Concurrent Copy operation is in Check the status of the specified progress on the specified secondary data secondary data volume. volume.

  • Page 202

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58286 The command was rejected because the Check the command parameters. command was issued to the primary data volume. The command is supposed to be issued to the secondary data volume.

  • Page 203

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58298 The specified secondary data volume is Check whether the specified secondary used by Concurrent Copy, Compatible data volume is used by Concurrent XRC or another program product.

  • Page 204

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58329 The operation of Add Pair (Paircreate) Please contact HP Technical Support. or Resume Pair (Pairresync) cannot be performed, because the data are remained in the journal cache for the master journal.

  • Page 205

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58345 The Add Pair (Paircreate) operation Be sure that IO suppression mode of the failed due to one of the following specified secondary data volume is reasons: enabled on the Universal Volume Mgr...

  • Page 206

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level A Thin Provisioning volume used as a P-VOL of Business Copy. A Thin Provisioning volume and a source volume of Auto LUN. A Thin Provisioning volume used as a P-VOL of Snapshot.

  • Page 207

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58485 The Add Pair (Paircreate) operation Confirm the state of the specified primary failed because the specified primary data in the Snapshot window. data volume was one of the following: the specified volume was a P-VOL of Snapshot and was in Reverse Copy...

  • Page 208

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58510 The Add Pair (Paircreate) operation Check the mirror ID assigned to the failed. specified primary data volume number (LDKC:CU:LDEV) from the secondary The combination of the specified primary storage system, and assign a mirror ID data volume number (LDKC:CU:LDEV)

  • Page 209

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level The specified volumes or the volumes in Device window. If this operation is the specified journal were deleted. unavailable to do, please contact HP However, the blockade of the volumes Technical Support.

  • Page 210

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58595 The Paircreate operation failed because Confirm that the Continuous Access the Continuous Access Journal function Journal function of the secondary storage of the secondary subsystem does not system supports LUSE volumes.

  • Page 211

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58609 The timer type cannot be changed, Check if the specified journal belongs to because the specified journal belongs to an extended consistency group (EXCTG). an extended consistency group (EXCTG).

  • Page 212

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58625 Journals cannot be added to the Check if the specified journal is being extended consistency group (EXCTG), used by other program product you are because the specified journals are being using.

  • Page 213

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level Swapping when it is referenced from the RAID Manager or Business Continuity Manager. 6505 58686 The specified operation failed, because Check the attribute of the journal of the the attribute of the journal of the remote remote storage system.

  • Page 214

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level then retry the operation with another command device. 6505 58696 The specified volume cannot be used as Check the I/O suppression mode of the a journal volume because the volume is specified volume.

  • Page 215

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 58705 The Delta resync operation failed. The Check the status of the specified specified secondary data volume should secondary data volume. meet the following requirements.

  • Page 216

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level The related program products are: The related program products are: Continuous Access Synchronous or Continuous Access Synchronous or Continuous Access Synchronous Z Continuous Access Synchronous Z Continuous Access Journal or Continuous Access Journal or...

  • Page 217

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 66594 The number of digits of LDEV (P-VOL) is Check the contents of the spreadsheet. invalid. 6505 66595 The format of LDEV (P-VOL) is invalid. Check the contents of the spreadsheet.

  • Page 218

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 66619 The value entered as LDKC (paired VOL) Check the contents of the spreadsheet. is outside the setting range. 6505 66620 The value of LDKC (paired VOL) is not Check the contents of the spreadsheet.

  • Page 219

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 66645 The number of digits of PathGroup is Check the contents of the spreadsheet. invalid. 6505 66646 The format of PathGroup is invalid. Check the contents of the spreadsheet.

  • Page 220

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 66671 The value entered as SuspendMode is Check the contents of the spreadsheet. outside the setting range. 6505 66672 The number of digits of CFW is invalid. Check the contents of the spreadsheet.

  • Page 221

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level The LDKC number of the specified number of the restore journal are the secondary data volume is different from same. the LDKC number of the specified restore journal.

  • Page 222

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 68026 The specified secondary data volume is Install the Continuous Access Journal used as a pair volume of Continuous 3DC & 4x4 Open Mainframe function Access Synchronous, External Storage in the secondary storage system.

  • Page 223

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 68784 The Pairresync operation failed because The master journal group of the specified the specified primary data volume was primary data volume runs on the 2DC one of the following.

  • Page 224

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level volume or Thin Provisioning Z volume that was specified as the secondary data volume was being initialized. 6505 68850 The operation failed, because the Specify “Mirror”...

  • Page 225

    Table 56 Error codes (part code 6505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6505 68886 The operation failed, because the remote Confirm whether the remote storage storage system did not support the system supports the specified operation. specified operation.

  • Page 226: Part Code 6507, Part Code 6510

    Part code 6507 Table 57 Error codes (part code 6507) Part Error Error Message Recommended Action Severity Code Number Level 6507 5036 Two or more commands which were not Check the settings, and retry the able to be processed were demanded. operation.

  • Page 227

    Table 58 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 9009 The export is complete. Click [OK]. 6510 9021 The Port Setting process has not To continue processing, click [Yes]. If the completed.

  • Page 228

    Table 58 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 91 18 Please check the specified value. To apply this setting, click [OK]. If you want to change the setting, click [Cancel].

  • Page 229

    Table 58 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 55039 You are specifying "Mirror" for the range Check the range setting. If you specify and trying to manipulate the same "Mirror,"...

  • Page 230

    Table 58 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 59008 Are you sure you want to delete the To delete the specified path, click [OK]. paths of the specified subsystem? Otherwise, click [Cancel].

  • Page 231

    Table 58 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 59103 There is no volume that can be registered Create a volume that can be used as a or deleted. journal volume. To do this, add a volume or use some other way.

  • Page 232

    Table 58 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level Check the status of the specified master journal. 6510 59328 The journal volume cannot be deleted, Change the status of mirror of the journal because the attribute of mirror for the to "Initial,"...

  • Page 233: Part Code 6610

    Table 58 Error codes (part code 6510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6510 69018 There are two or more LDKC numbers Check the LDKC number for the specified for the specified data volume. In this data volume, and specify only one LDKC operation, please specify only one LDKC number.

  • Page 234

    Table 59 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 9021 The Port Setting process has not To continue processing, click [Yes]. If the completed. Do you want to continue for processing finishes, reconfigure the port other ports? that is not in operation.

  • Page 235

    Table 59 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 91 18 Please check the specified value. To apply this setting, click [OK]. To change the setting, click [Cancel]. 6610 91 19 No graph item has been selected.

  • Page 236

    Table 59 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 55039 You are specifying "Mirror" for the range Check the range setting. If you specify and trying to manipulate the same "Mirror,"...

  • Page 237

    Table 59 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 59009 Since the number of preview data Click [OK]. Apply the preview data to exceeded the maximum, the excess data the storage system, then retry the were discarded.

  • Page 238

    Table 59 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level Continuous Access Journal, then start the Continuous Access Journal Z window or the Continuous Access Journal window. 6610 59043 The number of journal volumes in some Reduce the number of journal volumes journals exceeds the maximum.

  • Page 239

    Table 59 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 59151 The current microcode version of To use a mainframe volume as a journal DKCMAIN only supports OPEN-V as the volume, please contact HP Technical emulation type of a journal volume.

  • Page 240

    Table 59 Error codes (part code 6610) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6610 59332 A multiplatform volume is included in the Confirm whether the specified volume is specified volumes. a multiplatform volume. Also, confirm the version of the microcode of the storage The Add Pair operation cannot be system.

  • Page 241: Part Code 6805

    Part code 6805 Table 60 Error codes (part code 6805) Part Error Error Message Recommended Action Severity Code Number Level 6805 5099 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 6805 6012 An error occurred during SVP If this problem persists, please contact processing.

  • Page 242: Part Code 6810

    Table 60 Error codes (part code 6805) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6805 55214 The Level 2 Threshold setting is incorrect. Correct the setting, then retry. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 243

    Table 61 Error codes (part code 6810) (continued) Part Error Error Message Recommended Action Severity Code Number Level 6810 55212 The options "Block Option" and "Do not Correct the setting, then retry. If the same Block (Volume Level)" cannot be problem persists despite retrying, please specified at the same time.

  • Page 244: Message (part Code Group 7nnn), Part Code 7005

    9 Message (part code group 7nnn) This chapter includes the error messages with the part code 7005 to 71 10. Part code 7005 Table 62 Error codes (part code 7005) Part Error Error Message Recommended Action Severity Code Number Level 7005 5013 An error occurred during SVP...

  • Page 245

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8502 You cannot reserve the volume, because Delete the Remote Copy pair. a remote copy pair exists in the same subsystem frame. 7005 8503 You cannot create the new pair, because...

  • Page 246

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8519 Volumes specified as P-VOL and S-VOL, Select volumes with the same capacity. or those constituting LUSE are not When specifying LUSE volumes as P-VOL consistent in capacity.

  • Page 247

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8541 There is sufficient shared memory to Close the message box. create 4096 pairs, and the initial subsystem setup is complete. 7005 8542 Failed to complete the initial shared...

  • Page 248

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8560 This volume cannot be specified because Specify a volume that is not used as a it is used as a command device. command device.

  • Page 249

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8584 No volume is defined as a reserved Check the contents, and retry. volume. 7005 8585 The number of reserved volumes exceeds Stop the operation of the Reserve volume the maximum.

  • Page 250

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8606 The operation to create L2 pair has been When the P-VOL of L1 pair is used as rejected, because the P-VOL of L1 pair the P-VOL of Continuous Access is used as the P-VOL of Continuous Synchronous pair or External Storage...

  • Page 251

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8623 The command has been rejected, The S-VOL of Continuous Access because the specified volume is used as Synchronous or External Storage Access S-VOL of Continuous Access Synchronous Manager pair cannot be used as a or External Storage Access Manager...

  • Page 252

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8642 The command has been rejected, Wait until the status of the pair sharing because the specified S-VOL is shared the P-VOL becomes PAIR, then retry the as the P-VOL of the other pair and the operation.

  • Page 253

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 8657 The Swap&Freeze option cannot be Please contact HP Technical Support. specified, because the mode 80 is on. 7005 8670 The number of volumes composing the Match the number of volumes composing LUSE volume specified as the P-VOL does the LUSE volume you intend to specify...

  • Page 254

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 57101 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 7005 57102 An error occurred during SVP If this problem persists, please contact processing.

  • Page 255

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 58299 The operation failed because the Check the requirements for using the specified P-VOL was a data volume of volume with Continuous Access Journal. Continuous Access Journal.

  • Page 256

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 58492 The Pairsplit-S operation has failed. Refresh the window, and check whether Check the configuration. the pair exists. 7005 58493 The PCB required for this operation is Mount the required PCB, then retry the not mounted.

  • Page 257

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 58585 The operation failed because the CU Volumes that do not belong to CU group group of the specified volume is not 0 are currently not supported.

  • Page 258

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level composed of the Thin Provisioning volume and the volumes other than Thin Provisioning volume. 7005 68755 The Quick Restore command has been Quick Restore cannot be executed in the rejected, because device information current pair configuration.

  • Page 259

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 68868 The command has been rejected, Specify another volume. because the volume specified as S-VOL is a quorum disk. 7005 68869 The command has been rejected, Specify another volume.

  • Page 260: Part Code 7007

    Table 62 Error codes (part code 7005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7005 75005 The command was rejected, because no Set an LU path to the specified P-VOL, LU path was set to the volume specified then retry the operation.

  • Page 261: Part Code 7010

    Part code 7010 Table 64 Error codes (part code 7010) Part Error Error Message Recommended Action Severity Code Number Level 7010 51 15 The volume of S-VOL is different from Check the capacity of P-VOL and S-VOL. specified P-VOL. Specify a volume with the same capacity, and retry the operation.

  • Page 262

    Table 64 Error codes (part code 7010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7010 8658 Some settings could not be applied Check the error code in the Preview list. normally. Refer to the error code. 7010 8659 The PCB required for this operation is...

  • Page 263: Part Code 7105

    Table 64 Error codes (part code 7010) (continued) Part Error Error Message Recommended Action Severity Code Number Level for Pairsplit operation or Snapshot pair from Remote Web Console, if the is included in the specified pairs. specified pair is a Snapshot pair. Part code 7105 Table 65 Error codes (part code 7105) Part...

  • Page 264

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level pairs and the commands that can be accepted. 7105 8506 The command has been rejected, Vary the T-VOL or the reserved volume because the specified T-VOL or reserved offline from the mainframe host, then volume is used by the host.

  • Page 265

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8526 An internal logic error occurred. Please contact HP Technical Support. 7105 8527 An internal logic error occurred. Please contact HP Technical Support. 7105 8528 An internal logic error occurred.

  • Page 266

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8549 The S-VOL is not implemented. You cannot execute the operation for the volume which is not implemented. 7105 8550 The command has been rejected, Restore the blocked volume, then retry because the specified S-VOL is blocked the operation.

  • Page 267

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8569 The command has been rejected, See the section "Planning number of because the area of the differential table pairs" in the HP P9000 Business Copy or pair table to set pairs is insufficient.

  • Page 268

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8591 The specified pair is already set in Check the contents, and retry. another group. 7105 8592 The command was rejected because the Check the capacity of the installed licensed capacity was exceeded.

  • Page 269

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8609 The specified volume is not set as a Check the status of the volume. reserved volume. 7105 8610 The T-VOL is a target volume for Auto Release the Auto LUN setting.

  • Page 270

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8631 The specified CU number is invalid. Please contact HP Technical Support. 7105 8632 The timing of issuing the command is Please contact HP Technical Support.

  • Page 271

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8649 Because the boot device is the T-VOL in Check the specified volume number. the Delete Pair command, the flag does not match.

  • Page 272

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 8991 The command has been rejected, Withdraw the Compatible FlashCopy because the Compatible FlashCopy relationship. relationship exists. 7105 8992 The command has been rejected, Install additional shared memory.

  • Page 273

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 58259 The Quick Restore command has been Delete the Remote Copy pair or execute rejected, because the specified pair the operation by other pairs. contains external volumes, and also is used as a Remote Copy pair.

  • Page 274

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 58533 The operation failed, because the Release the journal volume setting or specified S-VOL was a journal volume. specify another volume. 7105 58534 The operation failed, because the...

  • Page 275

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 68747 The command has been rejected Cancel the setting where the T-VOL is because the FICON(R) Data Migration used by the other program products, and source volume is used in the specified then retry the operation.

  • Page 276

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level is a FICON(R) Data Migration Source configuration. Specify volumes other than Volume. FICON(R) Data Migration Source Volume for S-VOL, and then retry the operation. 7105 68776 The command has been rejected...

  • Page 277

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 75004 The command was rejected, because the Associate the specified Thin Provisioning Thin Provisioning Z volume specified as Z volume with a pool, and then retry the a reserved volume was not associated operation.

  • Page 278

    Table 65 Error codes (part code 7105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 7105 78121 The operation failed because the Specify another volume. specified S-VOL was used by Compatible FlashCopy SE, or was a TSE volume. 7105 78122 The operation failed because the...

  • Page 279

    Table 66 Error codes (part code 71 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level normal condition, and then retry the necessary, please contact HP Technical operation. Support. 71 10 8534 An internal logic contradiction occurred. Please contact HP Technical Support.

  • Page 280

    Table 66 Error codes (part code 71 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level Do you want to continue this operation? 71 10 65662 The data has been changed. The settings To continue processing, click [OK]. will be discarded if you continue the Otherwise, click [Cancel].

  • Page 281: Message (part Code Group 8nnn), Part Code 8005

    10 Message (part code group 8nnn) This chapter includes the error messages with the part code 8005 to 8809. Part code 8005 Table 67 Error codes (part code 8005) Part Error Error Message Recommended Action Severity Code Number Level 8005 2002 An error occurred during SVP If this problem persists, please contact...

  • Page 282

    Table 67 Error codes (part code 8005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8005 7060 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 8005 71 1 1 The storage system is in the internal Wait, then click [Refresh].

  • Page 283: Part Code 8105

    Table 67 Error codes (part code 8005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8005 65783 There are functions that cannot change Confirm the setting status of the current the system disk option due to one of the system disk option.

  • Page 284

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level for Remote Copy, Business Copy, Auto LUN, or Snapshot. 8105 1009 The emulation type of the volumes is not The configuration information has been for open systems, or the volumes are not changed already.

  • Page 285

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1067 You are trying to register the same host The configuration information has been group as the existing one. changed already. Check the settings, and request the configuration information setting again.

  • Page 286

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1 128 An error occurred. If this problem Check the setting(s), then retry the persists, please contact HP Technical operation. Support. 8105 1 130 The specified name is the same as the...

  • Page 287

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1353 S-VOLs remain on the Fibre-RCU port. Since the port you are trying to set is for This operation may cause a fatal Remote Copy, you must delete the S-VOL damage to S-VOLs.

  • Page 288

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 1926 The path cannot be set to the specified Check the setting. volume, because the volume is being used as a quorum disk. 8105 1927 The specified volume cannot be set as a...

  • Page 289

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 2205 Devices to be maintained include journal Delete all pairs to which the journal volumes. volumes belong. 8105 2504 No settings can be made because of a Release the reserved attribute of the volume reserved for RAID Manager.

  • Page 290

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 5030 The spreadsheet has not been changed Change the configuration at least one at all. line in the spreadsheet. 8105 5060 The length of the character string is One line can have up to 127 characters.

  • Page 291

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 5744 The command device security switch Turn on the command device switch. cannot be turned on because this is not command device. 8105 5745 The security switch on the port is off.

  • Page 292

    Table 68 Error codes (part code 8105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8105 5786 The path can be defined only for the A, Correct the name of port. E, J or N port. 8105 5789 The intermediate volume cannot be Correct the CU and LDEV.

  • Page 293: Part Code 8107

    Part code 8107 Table 69 Error codes (part code 8107) Part Error Error Message Recommended Action Severity Code Number Level 8107 5641 The number of lines exceeds the Check the setting. maximum number of lines of a spreadsheet. 8107 5642 The number of characters exceeds the Check the setting.

  • Page 294: Part Code 8210, Part Code 8222

    Table 70 Error codes (part code 81 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level 81 10 5775 A file access error occurred. Correct the specified contents, and retry the operation. 81 10 5776 The file type is invalid. Please select the Correct the specified contents, and retry file with the extension "*.spd".

  • Page 295: Part Code 8305, Part Code 8505

    Part code 8305 Table 73 Error codes (part code 8305) Part Error Error Message Recommended Action Severity Code Number Level 8305 56524 This function cannot be used by the Please contact HP Technical Support. storage partition administrator. Part code 8505 Table 74 Error codes (part code 8505) Part Error...

  • Page 296

    Table 74 Error codes (part code 8505) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8505 55012 An invalid SLPR Name was detected. Please contact HP Technical Support. SLPR No:%s 8505 55013 Invalid login information was detected. Please contact HP Technical Support.

  • Page 297

    Table 74 Error codes (part code 8505) (continued) Part Error Error Message Recommended Action Severity Code Number Level problem persists, please contact HP Technical Support. 8505 55027 The cache size is incorrect. Correct the cache size setting, and then retry the operation. If the problem CLPR No:%s persists, please contact HP Technical Support.

  • Page 298

    Table 74 Error codes (part code 8505) (continued) Part Error Error Message Recommended Action Severity Code Number Level intended CLPR is too high. Please wait until the write pending rate falls, and then retry the operation. 8505 58313 The configuration cannot be changed Check the Cache Residency size and the because the available Cache Residency number of Cache Residency areas.

  • Page 299: Part Code 8507, Part Code 8510

    Part code 8507 Table 75 Error codes (part code 8507) Part Error Error Message Recommended Action Severity Code Number Level 8507 6012 An error occurred during SVP If the same problem persists despite processing. retrying, please contact HP Technical Support. 8507 7070 An error occurred during SVP...

  • Page 300

    Table 76 Error codes (part code 8510) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8510 55262 The Parity Group cannot be migrated to Apply the tentative settings with no parity the CLPR that you newly created. Please groups to the CLPR that you have apply the tentative settings with no parity created, then migrate the parity group.

  • Page 301: Part Code 8605, Part Code 8610

    Part code 8605 Table 77 Error codes (part code 8605) Part Error Error Message Recommended Action Severity Code Number Level 8605 6012 An error occurred during SVP If this problem persists, please contact processing. If this problem persists, HP Technical Support. please contact HP Technical Support.

  • Page 302: Part Code 8805

    Table 78 Error codes (part code 8610) (continued) Part Error Error Message Recommended Action Severity Code Number Level When the mail notification service is enabled, destination e-mail address is required to input. 8610 65761 The IP address of the mail server is Enter the IP address or the host name.

  • Page 303: Part Code 8905

    Table 79 Error codes (part code 8805) (continued) Part Error Error Message Recommended Action Severity Code Number Level 8805 6024 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support 8805 6036 An error occurred during SVP If this problem persists, please contact processing.

  • Page 304: Message (part Code Group 9nnn), Part Code 9005

    1 1 Message (part code group 9nnn) This chapter includes the error messages with the part code 9005 to 9610. Part code 9005 Table 81 Error codes (part code 9005) Part Error Error Message Recommended Action Severity Code Number Level 9005 5013 An error occurred during SVP...

  • Page 305: Part Code 9007, Part Code 9010

    Table 81 Error codes (part code 9005) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9005 8102 This function is not supported. Check the DKC-MAIN version. 9005 8103 The subsystem status is invalid. Please Check the DKC-MAIN version. contact HP Technical Support.

  • Page 306: Part Code 9105

    Table 83 Error codes (part code 9010) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9010 65703 The maximum permissible capacity of Install additional license key(s) to expand program product became insufficient. the license capacity of this software title. Please install additional license key(s) to expand the license capacity of this software title.

  • Page 307

    Table 84 Error codes (part code 9105) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9105 6012 An error occurred during SVP An error occurred during the SVP processing. If this problem persists, processing. If this problem persists, please contact HP Technical Support.

  • Page 308: Part Code 9107

    Part code 9107 Table 85 Error codes (part code 9107) Part Error Error Message Recommended Action Severity Code Number Level 9107 6012 An error occurred during SVP An error occurred during SVP processing. If this problem persists, processing. If this problem persists, please contact HP Technical Support.

  • Page 309

    Table 86 Error codes (part code 91 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level 91 10 5621 No item is selected. Please select an Click [OK], select an item, and retry the item. operation. 91 10 5622 If you want to continue this operation, Click [OK], select only one line, and retry...

  • Page 310: Part Code 9205

    Table 86 Error codes (part code 91 10) (continued) Part Error Error Message Recommended Action Severity Code Number Level information are set to offline, and then select [Yes]. 91 10 56538 No volume is registered on the LDEV Delete all LDEV groups and register LDEV group because the volume configuration groups and Security groups again.

  • Page 311

    Table 87 Error codes (part code 9205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9205 7060 An error occurred during SVP If this problem persists, please contact processing. HP Technical Support. 9205 71 1 1 An error occurred during SVP If this problem persists, please contact processing.

  • Page 312: Part Code 9210

    Table 87 Error codes (part code 9205) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9205 66005 The spreadsheet declaration statement Check the contents of the Volume or the definition statement is not entered Retention spreadsheet. in the spreadsheet file. 9205 66006 The number of data items entered in the...

  • Page 313: Part Code 9605

    Table 88 Error codes (part code 9210) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9210 81 12 There is no valid volume. Mount volumes, then retry the operation. 9210 9107 The value that is under setup is not To continue processing, click [OK].

  • Page 314

    Table 89 Error codes (part code 9605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9605 8120 The specified logical volume does not Specify an open-system volume. exist. 9605 8122 This logical volume is busy. Retry a little later. 9605 8123 This function is not supported.

  • Page 315

    Table 89 Error codes (part code 9605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9605 8156 You cannot change the access attribute Set the expiration lock to Disable, then because the expiration lock is set to change the access attribute.

  • Page 316: Part Code 9610

    Table 89 Error codes (part code 9605) (continued) Part Error Error Message Recommended Action Severity Code Number Level 9605 68002 This logical volume cannot be selected Check the logical volume configuration, because it is used as a volume for System then retry the operation.

  • Page 317: Message (part Code Group 10nnn), Part Code 10010, Part Code 10121

    12 Message (part code group 10nnn) This chapter includes the error messages with the part code 10010 and 10122. Part code 10010 Table 91 Error codes (part code 10010) Part Error Error Message Recommended Action Severity Code Number Level 10010 5501 1 0 cannot be specified in all the fields or Reply to the message.

  • Page 318: Part Code 10122

    Part code 10122 Table 93 Error codes (part code 10122) Part Error Error Message Recommended Action Severity Code Number Level 10122 105194 An error occurred while formatting. Retry the operation. If the same problem persists despite retrying, please contact HP Technical Support. 10122 105195 An error occurred while preparing the...

  • Page 319

    Table 93 Error codes (part code 10122) (continued) Part Error Error Message Recommended Action Severity Code Number Level If the same problem persists despite retrying, please contact HP Technical Support. Part code 10122...

  • Page 320: Message (part Code Group 20nnn), Part Code 20020

    13 Message (part code group 20nnn) This chapter includes the error messages with the part code 20020 to 20825. Part code 20020 Table 94 Error codes (part code 20020) Part Error Error Message Recommended Action Severity Code Number Level 20020 107000 An error occurred during SVP If this problem persists, please contact...

  • Page 321

    Table 94 Error codes (part code 20020) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20020 107020 A file or a directory of the specified path Check the environment of file or directory does not exist, or the access is rejected. of the specified path.

  • Page 322

    Table 94 Error codes (part code 20020) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20020 107042 Failed to start the session due to no user Confirm whether you are authorized. authority. 20020 107043 Failed to save the specific information of Check the environment.

  • Page 323

    Table 94 Error codes (part code 20020) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20020 107059 The key store file does not exist. Check the environment. 20020 107060 Failed to get a certificate. Check the environment. 20020 107061 Failed to access the key store file.

  • Page 324: Part Code 20121

    Table 94 Error codes (part code 20020) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20020 107094 The number of onetime keys has Wait for a while, then retry the exceeded the maximum. operation. 20020 107095 Failed to authenticate the user account. Check the environment.

  • Page 325

    Table 95 Error codes (part code 20121) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20121 107023 An internal logic error occurred. If the same problem persists despite retrying, please contact HP Technical Support. 20121 107024 A connection error has occurred. Check the internet protocol (IP) address.

  • Page 326: Part Code 20122

    Table 95 Error codes (part code 20121) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20121 108001 Version mismatch between the Remote Clear the cache of JRE and browser Web Console and the SVP. being used, then restart the browser and retry the operation.

  • Page 327

    Table 96 Error codes (part code 20122) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20122 105059 The task cannot be deleted. The status of the task might be changed. Close the window, then check the task status.

  • Page 328

    Table 96 Error codes (part code 20122) (continued) Part Error Error Message Recommended Action Severity Code Number Level registered in any group is not allowed to access any LUN. Do you want to continue this operation? 20122 106074 All the hosts connected to the target ports To continue processing, click [OK].

  • Page 329: Part Code 20123

    Table 96 Error codes (part code 20122) (continued) Part Error Error Message Recommended Action Severity Code Number Level Therefore, the execution of the tasks are following status, which can be deleted inhibited at present. without any problem. Complete status Failed status 20122 109015 The task could not complete execution.

  • Page 330

    Table 97 Error codes (part code 20123) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20123 10701 1 Failed to get the RMI Lock. Do the following. This operation cannot be done while another user is changing the configuration.

  • Page 331

    Table 97 Error codes (part code 20123) (continued) Part Error Error Message Recommended Action Severity Code Number Level problem persists despite retrying, please contact HP Technical Support. 20123 107024 The content of a task to be registered If the same problem persists despite conflicts with that of another that has retrying, please contact HP Technical already been registered.

  • Page 332: Part Code 20222

    Part code 20222 Table 98 Error codes (part code 20222) Part Error Error Message Recommended Action Severity Code Number Level 20222 105004 The task for the operation is not selected. Select one or more table rows. 20222 105005 A task which is not in the state of Select another task which is in the state suspend is in the specified task.

  • Page 333: Part Code 20305

    Table 98 Error codes (part code 20222) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20222 109017 {0} is completed(Request). 20222 109021 Check the error details with the error code from the following list. Part code 20305 Table 99 Error codes (part code 20305) Part Code Error Number...

  • Page 334: Part Code 20322, Part Code 20422, Part Code 20520

    Part code 20322 Table 100 Error codes (part code 20322) Part Error Error Message Recommended Action Severity Code Number Level 20322 107001 The processing cannot continue due to Refresh the window, then retry the an internal logic contradiction. operation. If the same problem persists despite retrying, please contact HP Technical Support.

  • Page 335: Part Code 20522

    Table 102 Error codes (part code 20520) (continued) Part Error Error Message Recommended Action Severity Code Number Level 20520 107004 Failed to read the log preference. Check the environment. 20520 107005 The parameter is specified incorrectly. Specify a correct value. 20520 107006 Failed to read the preference.

  • Page 336: Part Code 20525

    Part code 20525 Table 104 Error codes (part code 20525) Part Code Error Number Error Message Recommended Action Severity Level 20525 107001 The specified report does not exist. Specify the correct name or ID of the report. 20525 107002 You do not have permission to execute Log in again with the user who has the specified command.

  • Page 337: Part Code 20624, Part Code 20705

    Table 104 Error codes (part code 20525) (continued) Part Code Error Number Error Message Recommended Action Severity Level 20525 107017 There is no deletable report. Display a list of reports and verify if there is any of reports that you created.

  • Page 338

    Table 106 Error codes (part code 20705) (continued) Part Code Error Number Error Message Recommended Action Severity Level 20705 6022 An error occurred during SVP If this problem persists, please processing. contact HP Technical Support. 20705 6533 An error occurred during SVP If this problem persists, please processing.

  • Page 339

    Table 106 Error codes (part code 20705) (continued) Part Code Error Number Error Message Recommended Action Severity Level 20705 761 12 An error occurred during SVP If this problem persists, please processing. contact HP Technical Support. 20705 761 13 The specified resource has already Exclude the duplicated setting, and been specified.

  • Page 340: Part Code 20721, Part Code 20722

    Part code 20721 Table 107 Error codes (part code 20721) Part Code Error Number Error Message Recommended Action Severity Level 20721 105001 No table rows are selected. Select one or more table rows. 20721 105003 No table row, or two or more table Select one table row.

  • Page 341: Part Code 20825

    Table 108 Error codes (part code 20722) (continued) Part Code Error Number Error Message Recommended Action Severity Level 20722 10531 1 You cannot delete the resource group Release the resource group that that has been assigned to a user has been assigned to the user group.

  • Page 342

    Table 109 Error codes (part code 20825) (continued) Part Code Error Number Error Message Recommended Action Severity Level 20825 107006 The SVP is busy. Wait for a while, and then retry the operation. 20825 107007 An internal logic error occurred. If this problem persists, please contact HP Technical Support.

  • Page 343: Support And Other Resources, Contacting Hp, Subscription Service, Documentation Feedback, Related Information, Hp Websites

    14 Support and other resources Contacting HP For worldwide technical support information, see the HP support website: http://www.hp.com/support Before contacting HP, collect the following information: Product model names and numbers Technical support registration number (if applicable) Product serial numbers Error messages Operating system type and revision level Detailed questions Subscription service...

  • Page 344: Conventions For Storage Capacity Values, Typographic Conventions

    http://www.hp.com/service_locator http://www.hp.com/support/manuals http://www.hp.com/support/downloads http://www.hp.com/storage/whitepapers Conventions for storage capacity values P9000 disk arrays use the following values to calculate physical storage capacity values (hard disk drives): 1 KB (kilobyte) = 1,000 bytes 1 MB (megabyte) = 1,000 bytes 1 GB (gigabyte) = 1,000 bytes 1 TB (terabyte) = 1,000 bytes...

  • Page 345

    Table 1 10 Document conventions (continued) Convention Element Monospace text File and directory names System output Code Commands, their arguments, and argument values Monospace, italic text Code variables Command variables Monospace, bold text Emphasized monospace text WARNING! Indicates that failure to follow directions could result in bodily harm or death. CAUTION: Indicates that failure to follow directions could result in damage to equipment or data.

  • Page 346: Glossary

    Glossary allocation The ratio of allocated storage capacity versus total capacity as a percentage. Allocated storage refers to those logical devices (LDEVs) that have paths assigned to them. Allocated storage capacity is the sum of the storage of these LDEVs. Total capacity is the sum of the capacity of all LDEVs on the disk array.

  • Page 347

    P-VOL Primary volume. parity group A set of hard disk drives that have the same capacity and that are treated as one group. A parity group contains both user data and parity information, which enables user data to be accessed if one or more drives in the group is not available.

  • Page 348: Index

    Index contacting HP, conventions document, storage capacity values, text symbols, disk arrays supported models, document conventions, related information, documentation HP website, providing feedback, help obtaining, technical support, related documentation, storage capacity values conventions, Subscriber's Choice, HP, symbols in text, technical support service locator website, text symbols, typographic conventions,...

Comments to this Manuals

Symbols: 0
Latest comments: