Table 33 Error codes (part code 3005) (continued)
Part
Error
Code
Number
3005
78020
3005
78024
3005
78025
3005
78026
3005
78027
3005
78028
3005
78029
3005
78030
3005
78031
3005
78032
3005
78034
3005
78035
3005
78036
3005
78037
3005
78038
3005
78039
3005
78040
3005
78041
96
Message (part code group 3nnn)
Error Message
The operation cannot be executed,
because the available period to stop
shrinking pools has elapsed.
The encryption key cannot be created,
because an already created encryption
key number is included in the specified
encryption key number.
The encryption key cannot be deleted,
because an uncreated encryption key
number is included in the specified
encryption key number.
The encryption key cannot be deleted,
because an encryption key in-use exists
in the specified encryption key number.
The frequency distribution data cannot
be obtained because it is not complete.
The frequency distribution data cannot
be obtained. There is no monitoring
information (Invalid monitoring).
The frequency distribution data cannot
be obtained. There is no monitoring
information (VOL creation).
The frequency distribution data cannot
be obtained. There is no monitoring
information (HDEV SWAP or Cnt Ac-S
initial copy occurs).
The specified Processor Blade has been
blockaded.
The specified Processor Blade is not
mounted.
The specified POOL ID or the LDEV ID
does not exist.
The frequency distribution data cannot
be obtained. There is no monitoring
information (SM depletion).
The specified logical volume is already
in the normal status.
The pool is blocked.
The specified POOL ID or the LDEV ID
is not for HDT use.
The DKC is set to the state of
suppression of pool shrinking.
The storage system is set to the state of
suppression of tier relocation starting.
The operation cannot be executed
because the specified pool is now in
zero data page discarding process.
Recommended Action
You cannot stop shrinking pools. Wait
until pools are shrunk.
Check the specified encryption key
number.
Check the specified encryption key
number.
Check the specified encryption key
number.
Wait for a while, then retry the
operation.
Collect the information, then retry the
operation.
Collect the information, then retry the
operation.
Collect the information, then retry the
operation.
Recover the blocked Processor Blade,
then specify it.
Check the specified Processor Blade.
Click [Refresh], then check the
configuration information again.
Check the total capacity of Thin
Provisioning volumes, then retry the
operation.
Check the logical volume status, then
retry the operation.
Recover the pool.
Check the configuration information.
Please contact HP Technical Support.
Please contact HP Technical Support.
Wait until the zero data pages are
discarded, or abort it.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
E
E
W