Download Print this page

HP XP P9500 Manual Page 268

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 65 Error codes (part code 7105) (continued)
Part
Error
Code
Number
7105
8591
7105
8592
7105
8593
7105
8594
7105
8595
7105
8596
7105
8597
7105
8598
7105
8599
7105
8600
7105
8601
7105
8602
7105
8605
7105
8606
7105
8607
7105
8608
268 Message (part code group 7nnn)
Error Message
The specified pair is already set in
another group.
The command was rejected because the
licensed capacity was exceeded.
The S-VOL is a source volume for Auto
LUN.
The S-VOL is a target volume for Auto
LUN.
The specified S-VOL does not exist.
The specified volume is a reserved
volume.
The command has been rejected,
because the number of pairs created with
the specified S-VOL has reached the
maximum.
The specified volume is not an S-VOL.
The specified volume is already an
S-VOL.
The RAID level of the specified volume
is not supported.
The specified S-VOL cannot be paired
with a backup server volume.
The command has been rejected,
because the specified S-VOL has already
been used as T-VOL of the other pair.
The Resync command was issued to a
device in the simplex status.
The operation to create L2 pair has been
rejected, because the S-VOL of L1 pair
is used as the M-VOL of Continuous
Access Synchronous Z pair.
The command has been rejected,
because the specified T-VOL is used as
M-VOL of Continuous Access
Synchronous Z pair.
The specified T-VOL is not defined.
Recommended Action
Check the contents, and retry.
Check the capacity of the installed
license key. To create more pairs,
purchase a license key for larger
capacity.
Release the Auto LUN setting.
Release the Auto LUN setting.
Refresh, then retry the operation.
Check the status of the volume.
Pairs cannot be created with the
specified S-VOL any more.
See the section "Volume pairs (S-VOLs
and T-VOLs)" in the HP P9000 Business
Copy for Mainframe Systems User Guide
for the composition of pairs.
Check the status of the volume.
Specify other P-VOL, and retry the
operation. Or delete the pair of the
specified volume, then retry the
operation.
Check the RAID level, and specify a
volume of the supported RAID level, then
retry the operation.
Check the contents, and retry.
The volume used as T-VOL of the other
pair cannot be used as S-VOL.
Check the pair status.
When the S-VOL of L1 pair is used as
the M-VOL of Continuous Access
Synchronous Z pair, L2 pair cannot be
created.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the HP P9000 Business
Copy for Mainframe Systems User Guide
for the relation between the state of
Continuous Access Synchronous Z pair
and the Business Copy Z operations.
Refresh the window, and retry the
operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: