HP XP P9500 Manual Page 276

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 65 Error codes (part code 7105) (continued)
Part
Error
Code
Number
7105
68776
7105
68777
7105
68808
7105
68809
7105
68810
7105
68814
7105
68832
7105
68833
7105
68834
7105
68854
7105
75002
7105
75003
276 Message (part code group 7nnn)
Error Message
is a FICON(R) Data Migration Source
Volume.
The command has been rejected
because the T-VOL of the specified pair
is a FICON(R) Data Migration Source
Volume.
The command has been rejected
because the specified volume is a
FICON(R) Data Migration Source
Volume.
The command was rejected because the
specified S-VOL was a Thin Provisioning
Z volume whose capacity was being
added.
The command was rejected because the
specified T-VOL was a Thin Provisioning
Z volume whose capacity was being
added.
The command was rejected because the
specified reserved volume was a Thin
Provisioning Z volume whose capacity
was being added.
The initialize function cannot be executed
because a Continuous Access
Synchronous pair, or a External Storage
Access Manager pair, or a Continuous
Access Journal pair is created by using
Thin Provisioning volumes.
The command has been rejected
because the specified CTG is used by
Snapshot.
The command has been rejected
because the specified CTG is used by
Business Copy Z.
The command has been rejected
because the specified CTG is used by
Business Copy.
The SI Operation for FICON(R) Data
Migration failed because more than one
T-VOL was assigned for the specified
S-VOL.
The command was rejected, because the
Thin Provisioning Z volume specified as
S-VOL was not associated with a pool.
The command was rejected, because the
Thin Provisioning Z volume specified as
T-VOL was not associated with a pool.
Recommended Action
configuration. Specify volumes other than
FICON(R) Data Migration Source Volume
for S-VOL, and then retry the operation.
The specified operation cannot be
executed in the current pair
configuration. Specify volumes other than
FICON(R) Data Migration source volume
for T-VOL, and then retry the operation.
The specified operation cannot be
executed to FICON(R) Data Migration
source volume. Specify a volume other
than FICON(R) Data Migration source
volume, and then retry the operation.
The operation cannot be done because
the capacity of target volume changes.
Verify the capacity of the volume, and
then retry the operation.
The operation cannot be done because
the capacity of target volume changes.
Verify the capacity of the volume, and
then retry the operation.
Verify the capacity of the volume, and
then retry the operation.
Delete the Continuous Access
Synchronous pair, Continuous Access
Journal pair, or External Storage Access
Manager pair that is using Thin
Provisioning volumes, then retry the
operation.
Use another CTG, or release the pair of
Snapshot where the specified CTG is in
use.
Use another CTG, or release the pair of
Business Copy Z where the specified
CTG is in use.
Use another CTG, or release the pair of
Business Copy where the specified CTG
is in use.
Specify the volume not used as S-VOL of
SI Operation for Mainframe Fibre Data
Migration, or retry the operation after
deleting the current pair.
Associate the specified Thin Provisioning
Z volume with a pool, and then retry the
operation.
Associate the specified Thin Provisioning
Z volume with a pool, and then retry the
operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: