HP XP P9500 Manual page 328

Table 96 Error codes (part code 20122) (continued)
Part Error
Code Number
20122 106074
20122 106075
20122 106079
20122 106089
20122 107019
20122 108029
20122 108030
20122 108031
20122 108032
20122 108033
20122 109001
20122 109002
20122 109003
328 Message (part code group 20nnn)
Error Message
registered in any group is not allowed
to access any LUN. Do you want to
continue this operation?
All the hosts connected to the target ports
are only allowed to access a LUN that
is defined in the group #00. This will
lead the possibility that LUNs, which are
defined in the group other than #00
being used at present, cannot be
recognized, then the file system might
be destroyed. Do you want to continue
this operation?
The configuration does not become
effective until the security switch is turned
on.
The specified item could not be
displayed because the configuration had
been changed.
Are you sure to execute "Shred LDEVs"?
This task execution deletes all of the
target LDEV data and the data cannot
be recovered.
An internal logic error occurred.
Remote Web Console cannot be used
because there is no license of Remote
Web Console.
There is a license that {0} day(s) remain
to end.
There is a license that {0} day(s) remain
to end, or a license whose capacity is
insufficient.
Remote Web Console cannot be used
because there is no reference authority
of Remote Web Console.
A time-out error occurred.
The processing is terminated normally.
The processing is not executed.
The number of tasks with auto delete
disabled has reached the maximum.
Recommended Action
To continue processing, click [OK]. To
stop processing, click [Cancel].
Turn the security switch on.
Click [OK] and verify the current
configuration displayed in the list.
If you do not want to continue, click
[Cancel] and go back to Delete LUN
Paths window, then click [Finish] to
complete.
Please contact HP Technical Support.
Check the state of installed licenses on
the license window.
To use Remote Web Console, set the
license of Remote Web Console to the
installed state.
Check the expiration date of the program
product on the license key window.
Purchase a new license if you want to
continue to use the program product.
Check the expiration date or the license
capacity of the program products on the
license key window. Purchase new
licenses if you want to continue to use
those program products.
To use Remote Web Console, login
again with the user who has the
reference authority of Remote Web
Console.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Click [OK], then continue the operation.
Click [OK], then continue the operation.
Open the task window, then set the auto
delete to disable for tasks in the
Severity
Level
W
W
W
W
E
W
W
W
W
E
i
W
W