Part Code 6805 - HP StorageWorks P9000 Manual

Table 56 Error codes (part code 6610) (continued)
Part Error
Code Number
6610 69017
6610 69018
6610 69019
6610 69021
6610 69084

Part code 6805

Table 57 Error codes (part code 6805)
Part Error
Code Number
6805 5099
6805 6012
6805 6023
6805 7060
6805 71 1 1
6805 7310
6805 8001
6805 8002
6805 81 10
230 Message (part code group 6nnn)
Error Message
No more journals can be registered,
because the number of registered
journals has reached the maximum.
There are two or more LDKC numbers
for the specified data volume. In this
operation, please specify only one LDKC
number.
The number of data volumes exceeds the
maximum.
Journals cannot be added to the
extended consistency group (EXCTG),
because the number of EXCTG exceeds
the maximum.
Do you want to release the remote
command device from the mirror?
Error Message
An error occurred during SVP
processing.
An error occurred during SVP
processing.
If this problem persists, please contact
HP Technical Support.
The SVP is busy.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
This error code is not registered.
A communication time-out error occurred
in the subsystem.
Error happened after some change
occurred. Please refresh the array
configuration. Please retry later.
Communication is busy.
The configuration could not be changed.
Recommended Action
Check the number of registered journals.
Check the LDKC number for the specified
data volume, and specify only one LDKC
number.
Reduce the number of data volumes and
retry the operation.
You cannot create additional volume
pairs once the maximum number has
been reached
Check the number of registered EXCTG.
To continue the operation, click [OK].
Otherwise, click [Cancel].
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Retry the operation. If this problem
persists, please contact HP Technical
Support.
Retry later.
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
Severity
Level
E
E
W
E
E
E
W
W
E