Part Code 6805 - HP StorageWorks P9000 - Disk Arrays Manual

Hp storageworks p9000 remote web console messages (av400-96351, january 2011)
Hide thumbs Also See for StorageWorks P9000 - Disk Arrays:
Table of Contents

Advertisement

Table 56 Error codes (part code 6610) (continued)
Part
Error
Code
Number
6610
69017
6610
69018
6610
69019
6610
69021
6610
69084

Part code 6805

Table 57 Error codes (part code 6805)
Part
Error
Code
Number
6805
5099
6805
6012
6805
6023
6805
7060
6805
71 1 1
6805
7310
6805
8001
6805
8002
6805
81 10
Error Message
No more journals can be registered,
because the number of registered
journals has reached the maximum.
There are two or more LDKC numbers
for the specified data volume. In this
operation, please specify only one LDKC
number.
The number of data volumes exceeds the
maximum.
Journals cannot be added to the
extended consistency group (EXCTG),
because the number of EXCTG exceeds
the maximum.
Do you want to release the remote
command device from the mirror?
Error Message
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
The SVP is busy. Please wait for a while,
and then retry the operation.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
This error code is not registered.
A communication time-out error occurred
in the subsystem. Please wait for a while,
and then retry the operation.
Error happened after some change
occurred. Please refresh the array
configuration. Communication busy.
Please retry later.
The configuration could not be changed.
Recommended Action
Check the number of registered journals.
Check the LDKC number for the specified
data volume, and specify only one LDKC
number.
Reduce the number of data volumes and
retry the operation.
You cannot create additional volume
pairs once the maximum number has
been reached
Check the number of registered EXCTG.
To continue the operation, click [OK].
Otherwise, click [Cancel].
Recommended Action
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the problem persists despite retrying,
please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Retry the operation. If the same problem
persists despite retrying, please contact
HP Technical Support.
Wait a moment and retry.
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
Severity
Level
E
E
W
E
E
E
W
W
E
Part code 6805
219

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StorageWorks P9000 - Disk Arrays and is the answer not in the manual?

Table of Contents