HP XP P9500 Manual page 158

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 53 Error codes (part code 6005) (continued)
Part
Error
Code
Number
6005
8768
6005
8769
6005
8770
6005
8772
6005
8773
6005
8775
6005
8776
6005
8777
6005
8778
158 Message (part code group 6nnn)
Error Message
The RCU is still in another Remote Copy
condition.
The RCU is still in another Remote Copy
condition.
The Cache on the MCU is automatically
recovering. Please wait a few minutes
then retry again.
Change pair operation failed due to
communication error or the R-VOL status
is invalid.
Pair change was refused because
M-VOL is suspended.
Multi platform feature already installed
in RCU.
A volume cannot be used as an M-VOL
when:
it is used by Continuous Access
Journal or Continuous Access Journal
Z.
it is used by Business Copy Z or
Compatible FlashCopy.
Combination of MCU with RCU
controller type is not supported.
One side of the Cache or shared
memory on the RCU is blocked.
Recommended Action
The RCU containing the
R-VOL is being used as the
RCU for Continuous Access
Synchronous. Verify the
status of the RCU, if
necessary delete the RCU,
then retry the operation.
The RCU containing the
R-VOL is being used as the
RCU for Continuous Access
Synchronous. Verify the
status of the RCU.
Click [OK] to acknowledge
the message, then retry the
operation after the cache
has been recovered.
The pair option change
operation failed, either
because a communication
error occurred or because
the R-VOL status is not valid.
Verify the status, and view
the License Key window at
the RCU side to check the
licensed capacity for
Mainframe Array
Management. If the licensed
capacity for Mainframe
Array Management is
insufficient, purchase a
license key for a larger
capacity.
Resume the pair for the
M-VOL, then retry the
operation.
The multiplatform feature has
already been installed in the
RCU. Verify the
configuration of the RCU.
Select another volume.
Check the controller type of
the specified MCU and
RCU, then contact HP
Technical Support.
There is an invalid cache or
shared memory status on the
RCU. Check the status and
recover the cache or shared
Severity Level
W
W
W
W
W
W
W
W
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents