HP XP P9500 Manual page 55

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 22 Error codes (part code 0605) (continued)
Part
Error
Error Message
Code
Number
0605
68901
An external volume was not able to be
recovered.
0605
68902
The external volume was able to be
restored, but some of mapping paths
were not able to be restored normally.
0605
68903
Failed to disconnect from the external
volume.
0605
78031
The specified Processor Blade is blocked.
0605
78032
The specified Processor Blade is not
mounted.
0605
78047
A sufficient Cache Control Device cannot
be allocated to the target volume.
0605
78048
Failed to get the user information.
0605
78049
The operation cannot be done because
the port which belongs to a resource
group to which the user has no access
right is connected to the specified
external port.
0605
78050
The operation cannot be done because
the port which belongs to a resource
group to which the user has no access
right is connected to the specified
external path.
0605
78051
The operation cannot be done because
the port which belongs to a resource
group to which the user has no access
right is connected to the specified
external path group.
0605
78052
The operation cannot be done because
the specified WWN is derived from the
port that belongs to a resource group to
which the user has no access right.
0605
78053
The specified external volume cannot be
used because the user has no access
right to a resource group to which the
external volume belongs.
0605
78054
The operation cannot be done because
the specified external path contains the
external volume that belongs to a
resource group to which the user has no
access right.
0605
78055
The operation cannot be done because
the specified external path group
Recommended Action
Check the status of the mapping path
and resolve the root cause of blockade,
then retry the operation.
Check the status of the mapping path
and resolve the root cause of blockade
if needed, then retry the operation.
Check the states of the external volume
and the mapping path, and do not retry
the operation until the states return to
normal.
If the states cannot be restored to normal,
or if the problem persists despite retrying,
please contact HP Technical Support.
Recover the blocked Processor Blade,
then specify it.
Check the specified Processor Blade.
Delete unnecessary volumes, then retry
the operation. If this problem persists,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 0605
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents