HP XP P9500 Manual page 71

Table 28 Error codes (part code 01022) (continued)
Part Error Error Message
Code Number
01022 105021 No more HBA WWN can be registered,
because the number of registered HBA
WWNs has reached the maximum.
01022 105022 The selected information cannot be
added, because a duplicated HBA
WWN is in the information being
selected.
01022 105023 The selected information cannot be
added because a duplicated host name
is in the information being selected.
01022 105024 The specified HBA WWN cannot be
added because it is already used in the
same port, or it exists in the [Selected
Hosts] table.
01022 105025 The specified host name cannot be
added because it is already used in the
same port, or it exists in the [Selected
Hosts] table.
01022 105026 The processing cannot be done because
of no data in the [Selected Hosts] table.
01022 105027 [Detail] is clicked in the state that no row
is selected.
01022 105028 [Detail] is clicked in the state that multiple
rows are selected.
01022 105029 Host groups cannot be added in this
port, because the port is not Target or
RCU Target.
01022 105030 No more host group can be added,
because the number of registered host
groups that can be added to the subject
port has reached the maximum.
01022 105031 The host group cannot be added
because no row is selected in any of the
[Available Hosts] table and the
[Available Ports] table.
01022 105033 No more host group can be added,
because the number of registered hosts
that can be added to the subject port has
reached the maximum.
01022 105037 The specified name of the host group is
incorrect.
01022 105038 The default host group name cannot be
used for the host group setting.
01022 105040 [Detail] is clicked without selecting any
row.
Recommended Action
Check the setting(s).
Only the first duplicate item is added.
Check the contents that have been
added.
Only the first duplicate item is added.
Check the contents that have been
added.
Check the setting(s).
Check the setting(s).
Check if there is a target host to be set
in the [Selected Hosts] table. When there
is not, add host(s) and retry the
operation. When there is, close the
window(s) and refresh it, then retry
again. If the same problem persists
despite retrying, please contact HP
Technical Support.
Select one table row.
Select one table row.
Check the setting(s).
Check the setting(s).
Select one or more rows in the [Available
Hosts] table and the [Available Ports]
table, then click [Add].
Check the setting(s).
Enter the host group name with up to 64
alphanumeric characters and symbols (\
/: , ; * ? "< > | are excluded).
Specify another host group name.
Select one table row.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 01022 71