HP XP P9500 Manual page 63

Table 27 Error codes (part code 1005) (continued)
Part Error Error Message
Code Number
1005 1022 Invalid host mode.
1005 1023 Invalid Fibre address.
1005 1024 Invalid Fibre topology information.
1005 1025 The specified LU path does not exist.
1005 1059 LUN security setting has been made to
a non-Fibre port. LUN security is a
function of LUN Manager.
1005 1061 Security Switch Off operation and path
adding operation cannot be performed
simultaneously.
1005 1063 The specified WWN is already in use.
1005 1064 You are trying to register the same
WWN that is already registered.
1005 1065 The specified host name or the host
group name is already registered. (The
host name and the host group name
cannot be the same.)
1005 1066 WWN number, which is not registered,
is specified. (When deleting, or
changing)
1005 1067 You are trying to register the same host
group number as the already registered
one.
1005 1068 The specified host group has not been
registered.
Recommended Action
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Check the specified contents, then retry
the operation.
First, add paths, then click Apply. Next,
turn off the security switch, then click
Apply.
Check the specified contents, then retry
the operation.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Correct the specified contents, and
request the setting of the configuration
information again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
Part code 1005 63