HP XP P9500 Manual page 53

Table 22 Error codes (part code 0605) (continued)
Part Error Error Message
Code Number
corresponding to that of another external
volume in the same External Path Group.
0605 66520 Mainframe volume and intermediate
volume cannot be set because the
package for mainframe system is not
mounted.
0605 66568 Multiple operation tags are defined.
0605 66675 The syntax of the parameter is invalid.
0605 66692 The volume in the local storage system
cannot be operated.
0605 66693 A correct parameter as a data transfer
volume is not set.
0605 66694 A correct parameter as
RemoteCommandDevice is not set.
0605 66695 Specified port is not external port.
0605 66697 The value entered as PathMode is
outside the setting range.
0605 66698 The number of alternate Path definitions
that can be set to the external volume
has exceeded the maximum.
0605 66699 The number of LDEV definitions that can
be set to the external volume has
exceeded the maximum.
0605 66702 The value of External Path Group is not
set within the available range.
0605 66705 It is not Port number that can be
specified.
0605 66710 It is not set within the range where LUN
can be used.
0605 66713 The value of ExG is not set within the
available range.
0605 66715 Attribute is invalid.
0605 66718 It is not set within the range where CLPR
can be used.
0605 66720 It is not emulation type that can be
specified.
0605 66722 CacheMode is invalid.
0605 66724 InflowControl is invalid.
0605 66736 It is not set within the range where LDKC
can be used.
0605 66739 It is not set within the range where CU
can be used.
0605 66742 It is not set within the range where LDEV
can be used.
Recommended Action
Check the mounted packages.
Check the contents of the spreadsheet.
Check the syntax of parameter.
Specify the volume in an external storage
system.
Check the setting of target external
volume.
Check the setting of target external
volume.
Specify the external port.
Check the value entered as PathMode.
Check the number of alternate Path
definitions.
Check the number of LDEV definitions.
Check the setting of External Path Group.
Check the setting of Port number.
Check the setting of LUN.
Check the setting of ExG.
Check the setting of Attribute.
Check the setting of CLPR.
Check the setting of emulation type.
Check the setting of CacheMode.
Check the setting of InflowControl.
Check the setting of LDKC.
Check the setting of CU.
Check the setting of LDEV.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 0605 53