HP XP P9500 Manual page 203

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 56 Error codes (part code 6505) (continued)
Part
Error
Error Message
Code
Number
6505
58298
The specified secondary data volume is
used by Concurrent Copy, Compatible
XRC or another program product.
6505
58302
The specified volume is used as a
command device.
6505
58305
A path is defined to the specified
volume.
6505
58306
The specified secondary data volume is
used as a command device.
6505
58307
The specified secondary data volume is
an On-Demand (Just in Time) volume.
6505
58308
The specified primary data volume is
used as a command device.
6505
58324
The Add Pair (Paircreate) operation
failed because the specified primary
data volume was a P-VOL of Continuous
Access Synchronous or External Storage
Access Manager or an M-VOL of
Continuous Access Synchronous Z.
6505
58325
The specified primary data volume is
used by Continuous Access Synchronous,
External Storage Access Manager, or
Continuous Access Synchronous Z. The
operation failed because the status of
the Continuous Access Synchronous pair,
the External Storage Access Manager
pair, or the Continuous Access
Synchronous Z pair was inappropriate.
6505
58326
The Add Pair (Paircreate) operation
failed because the specified primary
data volume was shared by Continuous
Access Synchronous (or Continuous
Access Synchronous Z) and Business
Copy (or Business Copy Z).
6505
58327
The Add Pair (Paircreate) operation
failed because the specified primary
data volume was an LUSE volume.
6505
58328
The operation of Add Pair (Paircreate)
or Resume Pair (Pairresync) cannot be
performed, because the data are
remained in the journal cache for the
restore journal.
Recommended Action
Check whether the specified secondary
data volume is used by Concurrent
Copy, XRC Replication or any of the
following program products:
Business Copy Z
Continuous Access Synchronous Z
Compatible FlashCopy
Auto LUN
Check the configuration of the specified
volume.
Check the configuration of the specified
volume.
Check the configuration of the specified
secondary data volume.
Check the configuration of the specified
secondary data volume.
Check the configuration of the primary
data volume.
Confirm the controller type of the RCU.
Check the status of the specified primary
data volume in the Continuous Access
Synchronous, External Storage Access
Manager, or the Continuous Access
Synchronous Z window.
If the primary data volume is in PSUS,
PSUE or Suspend status, restore the
volume, then retry the operation.
If the primary data volume is in COPY
or Pending status, retry the operation
after the status of the volume changes to
PAIR or Duplex.
Specify another primary data volume,
and retry the operation.
Specify another primary data volume,
and retry the operation.
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
E
Part code 6505 203

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents