Part Code 0010 - HP XP P9500 Manual

Part code 0010

Table 8 Error codes (part code 0010)
Part Error
Code Number
0010 6023
0010 6027
0010 6070
0010 6094
0010 7060
0010 7440
0010 8101
0010 9376
0010 55005
0010 56000
0010 56500
22 Message (part code group 0nnn)
Error Message
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
A network error occurred. The probable
causes might be one of the following.:
The SVP was not ready.
An error occurred in the SVP.
A timeout error occurred while
communicating with the SVP.
An error occurred while connecting to
the SVP.
An error occurred while writing to a file.
An error occurred in the client logic.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
The system cannot apply the new
configuration. Do you want to refresh?
The capacity for storing the audit log file
is running out.
The specified file does not exist.
An error occurred during file reading.
An error occurred while writing to a file.
Recommended Action
If this problem persists, please contact
HP Technical Support.
You cannot connect to the SVP because
of factors, such as a network error or
SVP error. Check the IP address. If the
IP address is correct, close the browser
(also close the browser of the storage
list), and log in again after waiting a
while. If the problem persists, please
contact HP Technical Support.
The version of Remote Web Console may
not match the version of destination SVP.
Clear the cache of JRE and the browser.
Restart the browser, and then retry the
processing. The Remote Web Console
is downloaded via the network and then
executed. If you use a proxy server, the
old version of the program may remain
in the cache of the proxy, and may be
downloaded and executed. If this
problem persists, contact your network
administrator. If your network does not
have any problem, and this problem
persists, please contact HP Technical
Support.
You cannot connect to the SVP because
of factors, such as a network error or
SVP error. Check the IP address. If the
IP address is correct, close the browser
(also close the browser of the storage
list), and log in again after waiting a
while. If the problem persists, please
contact HP Technical Support.
Please contact HP Technical Support.
Delete the cache file of the browser,
restart the browser, and log on again.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Click [Refresh], and retry the operation.
Download the audit log file.
Specify the existing file.
Check the file status.
Check the status of the file. Alternatively,
check the status of the drive where the
Severity
Level
E
E
E
E
E
E
W
W
W
E
E