HP XP P9500 Manual page 225

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 56 Error codes (part code 6505) (continued)
Part
Error
Error Message
Code
Number
6505
68886
The operation failed, because the remote
storage system did not support the
specified operation.
6505
68887
The operation failed, because the
specified primary data volume was as
follows:
This volume was used as T-VOL of
Compatible FlashCopy.
This volume was used as M-VOL of
Continuous Access Synchronous Z,
and it was suspended by either of the
following settings:
It was a pair of synchronous
consistency group.
It was a pair that the "Cylinder" was
set to "Difference Management."
6505
68888
The operation failed, because the
specified "primary data volume" was
used as T-VOL of Compatible FlashCopy
that might be in the abnormal state due
to a failure.
6505
75015
The specified LDEV cannot be used
because the user has no access right to
a resource group to which the LDEV
belongs.
6505
75021
The specified operation cannot be done
because there is an LDEV that has been
set to a different resource group.
6505
75027
The specified port cannot be used
because the user has no access right to
a resource group to which the port
belongs.
6505
75028
The operation cannot be done because
the port which belongs to a resource
group to which the user has no access
right is used as the Initiator of a local
storage system.
6505
78003
The specified journal cannot be used.
6505
78004
The specified consistency group cannot
be used.
6505
78050
The operation failed because the
specified capacity of the primary data
volume is not supported by the current
microcode version.
6505
78051
The operation failed because the
specified capacity of the secondary data
volume is not supported by the current
microcode version.
6505
78066
The operation failed. The Mainframe
Fibre CHA of RCU is not mounted or all
the Mainframe Fibre CHA are blocked.
Recommended Action
Confirm whether the remote storage
system supports the specified operation.
Confirm the relationship status of
Compatible FlashCopy and the pair
status of Continuous Access Synchronous
Z.
Confirm the relationship status of the
Compatible FlashCopy.
Verify the resources allocation for the
user with security administrator role.
Specify LDEVs defined in the same
resource group.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Check the specified journal.
Check the specified consistency group.
Check the specified capacity of the
primary data volume and the current
microcode version.
Check the specified capacity of the
secondary data volume and the current
microcode version.
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
E
Part code 6505 225

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents