HP XP P9500 Manual page 74

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 28 Error codes (part code 01022) (continued)
Part
Error
Code
Number
01022
105209
01022
105210
01022
105252
01022
105253
01022
105277
01022
105296
01022
105297
01022
105298
01022
105304
01022
105421
01022
105422
01022
106501
01022
106502
74
Message (part code group 1nnn)
Error Message
name is used in the same port, or, it is
used in the item that has been moved in
the [Selected Host Groups] table.
The host mode is left blank.
There are blank items in the Host Mode
Options Table.
Other than the Host Mode 00 [Standard]
has been set to the Host Group #00 of
the specified port.
[Enabled] has been set to the Host Mode
Option for the Host Group #00 of the
specified port.
Some LDEVs or Host Groups that are not
available for LUN path setting are
excluded from the choices.
The specified port cannot be used
because the user has no access right to
a resource group to which the port
belongs.
The specified host group cannot be used
because the user has no access right to
a resource group to which the host group
belongs.
The specified LDEV cannot be used
because the user has no access right to
a resource group to which the LDEV
belongs.
The operation cannot be done because
the host group which belongs to a
resource group to which the user has no
access right is included in the operation
targets.
None of Target, RCU Target, or Initiator
is the attribute of a port to which the
specified host group belongs.
Any host mode option other than 49,
50, and 51 cannot be enabled because
the host group of the Initiator port is
included in the operation object.
The specified port does not exist in the
configuration.
The specified host group does not exist
in the configuration.
Recommended Action
Set the item that is left blank, then retry
the operation.
Set the item that is left blank, then retry
the operation.
To change the setting from Target/RCU
Target to Initiator/External, set only 00
to the host group of the target port, set
the host mode to 00 [Standard], and set
all of the host mode options to Disable.
To change the setting from Target/RCU
Target to Initiator/External, set only 00
to the host group of the target port, set
the host mode to 00 [Standard], and set
all of the host mode options to Disable.
Click [OK], then continue the operation.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Correct the settings, and then retry the
operation.
Select only the host group that belongs
to a port of Target or RCU Target
attribute, and then retry the operation.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Refresh the window, then retry the
operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
E
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents