HP XP P9500 Manual page 265

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 65 Error codes (part code 7105) (continued)
Part
Error
Error Message
Code
Number
7105
8526
An internal logic error occurred.
7105
8527
An internal logic error occurred.
7105
8528
An internal logic error occurred.
7105
8529
An internal logic error occurred.
7105
8530
An internal logic error occurred.
7105
8531
An internal logic error occurred.
7105
8532
The command has been rejected,
because the S-VOL or the T-VOL is being
used by the host.
7105
8533
The command has been rejected,
because the emulation type of the
specified volume is not supported or the
specified T-VOL is used as a data volume
of Continuous Access Journal Z.
7105
8535
A processor failure was detected.
7105
8536
A cache failure was detected.
7105
8537
The cache capacities do not match.
7105
8538
An SM failure was detected.
7105
8539
There is insufficient shared memory to
create 4096 pairs.
7105
8540
There is sufficient shared memory to
create 4096 pairs, but initial subsystem
setup is required before creating pairs.
7105
8541
There is sufficient shared memory to
create 4096 pairs, and the initial
subsystem setup is complete.
7105
8542
Failed to complete the initial shared
memory setup.
7105
8543
The shared memory size is different.
7105
8544
16 Mbytes of shared memory is
available.
7105
8545
A power supply failure is detected.
7105
8546
The command was rejected. The PS OFF
is in progress.
7105
8547
A data transfer failure is detected (CHA).
7105
8548
A data transfer failure is detected (DKA).
Recommended Action
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Stop the usage by the host.
Specify a volume of the supported
emulation type. When the T-VOL is used
as a data volume of Continuous Access
Journal Z, the command cannot be
executed in the current status of
Continuous Access Journal Z pair.
See the section "Sharing Business Copy
Z volumes" in the HP P9000 Business
Copy for Mainframe Systems User Guide
for the relation between the status of
Continuous Access Journal Z pair and
the Business Copy Z operations.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
There is insufficient shared memory in
DKC. Please contact HP Technical
Support.
Please contact HP Technical Support.
Close the message box.
Please contact HP Technical Support.
Please contact HP Technical Support.
Check the contents, and retry.
Please contact HP Technical Support.
Retry the operation with power ON.
Please contact HP Technical Support.
Please contact HP Technical Support.
Severity
Level
E
E
E
E
E
E
W
W
E
E
E
E
E
E
i
E
E
W
E
W
E
E
Part code 7105 265

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents