HP XP P9500 Manual page 11

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 1 Error codes (part code 0001) (continued)
Part
Error
Error Message
Code
Number
0001
4007
An error occurred. If this problem
persists, please contact HP Technical
Support.
0001
4008
An error occurred. If this problem
persists, please contact HP Technical
Support.
0001
4009
An error occurred. If this problem
persists, please contact HP Technical
Support.
0001
4010
An error occurred. If this problem
persists, please contact HP Technical
Support.
0001
401 1
A network error occurred. The probable
cause is:
A timeout error occurred during
communication with the SVP.
0001
4012
The number of clients logged on to the
RMI server has exceeded 32.
0001
4013
The server configuration is invalid. Please
contact HP Technical Support.
0001
4020
Network error detected; exclusive lock
is released.
0001
5013
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
0001
5014
The user name or the password is
invalid.
0001
5075
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
0001
5099
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
0001
5132
The specified user name is already
logged in, or the previous logon was not
properly terminated.
0001
5300
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
0001
5301
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
0001
5400
Since the SVP is busy, the monitoring
data cannot be obtained.
Recommended Action
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
The error occurs only in the internal
process.
Log on again.
A network error may occur when the
load of another application program
working on the same PC with Remote
Web Console is high.
Increase the value of the RMI time-out
period when network error occurs.
Log on again after a while.
Failed to access the Config file. Please
contact HP Technical Support.
Lock is removed. Lock again.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Enter a correct user name or a password.
If this problem persists, please contact
HP Technical Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Log in with a different user name. Or,
there is a possibility that the previous
termination process might be invalid
(terminated by clicking the end button of
the browser). In this case, log in again
after the RMI Time-out (default 1 min.).
If this problem persists, please contact
HP Technical Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Wait a while, then retry.
Severity
Level
E
E
E
E
W
E
E
W
E
W
W
E
W
E
E
W
Part code 0001
1 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents